Carburetor hose (location) ?
 

Working on new to me Cub Cadet 1641.

1641 (145-653-100) - Cub Cadet Garden Tractor (SN: 821060 - 880000)

Model #303447 Type 0447-01 Code 940916

Just notice there was nothing going to this Vacuum port in picture below.

Where does this go?

Thanks in advance.

Attachment 105452





.

That is the overflow for the carburetor float in case the float gets stuck open the fuel comes out of it.

Thank you.:Thanks:

There is no hose on that elbow but I believe there should be. If gas dribbles out, it goes right through the engine cooling fan and blows it straight out the front past the muffler.

I will route one somewhere.
Thanks for the info.





.

Okay
Now I have a fuel /emission hose neatly routed to the bottom of the tractor/
on the float overflow tube.

I replaced the crankcase breather tube and top gasket.

I was putting the breather base on and :bigthink:
This bracket in the picture below seems to be to tall.
it will bend the breather base if I tighten it down.

Is this normal?

Attachment 105462





.

Maybe you have it turned the wrong way?

I will take a picture.
There is a bolt that is striped out/ that may be causing the problem?


So

I will check that to see if it :American Flag 1:

The bracket turned the other way is a whole lot better.

Thanks Mike

I got the bolt issue fixed.

Now I will fix the PO's wiring mess.
Then I will be up and running.






.