Only Cub Cadets - Cross Reference Cub Cadet to NAPA

Here's a list of some stuff I found from NAPA. I think there may be more things. Hope you find this useful.

Cross Reference Cub Cadet to NAPA

Tie rod end CCC # 723-3018 NAPA # 7-04231

3/4" wheel bearing IH # 394883R93, NAPA # 7-04292

1" wheel bearing CCC # 741-3002, NAPA # 7-08412

Electronic Voltage Regulator plug NAPA # 7-016008

5 prong ignition switch plug NAPA # 7-016034

Breaker points Kohler # 47-150-03, NAPA # 7-01029

Condenser IH # 62188C1, Kohler # 230722-S, NAPA # 7-01338

Muffler, models 102-149 IH # 393840R91, NAPA # 7-03680

Hydro filter CCC # 723-3014, NAPA # 1084

Hydro filter for auto gear pump CCC # 723-3014, NAPA # 1410

Rear wheel seal CCC # 721-0187, NAPA # 9878

Hydro input seal IH # 394847R91, Sundstrand # 9008000-6201 NAPA # 6204

Hydro trunion seal SN 592014 & below IH # 383534R91 NAPA # 6720

Hydro trunion seal SN 592015 & above Sundstrand # 9008000-6701 NAPA # 6763

PTO bearing, models 70-169 IH # 60071C91 NAPA # RA100RR and PRA100RR (cheaper version)

Engine oil filter Kohler 52-050-02-S, NAPA # 1348

Engine oil filter Kohler 12-050-01-S, NAPA # 1056

Shaft seal for Narrow Frame Hydraulic lift pump IH # 347478R91, NAPA # 4911

Sway bar repair kit to replace Quiet Line ISO mount rubbers NAPA # 265-1285

Spark Plug Cross Reference Chart
Engine – Kohler K241 (10 HP), K301 (12 HP), K321 (14 HP), K341 (16 HP)

Manufacturer and Number ------- Mfgr. Stock Number
Champion H10C --------------------- 844
Denso W14L --------- -------------- 6013
NGK B4L ---------------------------- 3112
14mm, 7/16 reach, 13/16 hex. These plugs recommended for stock engines.

Engine* – Kohler K241 (10 HP), K301 (12 HP), K321 (14 HP), K341 (16 HP)

Champion H8C ------------------------ 587
14mm, 7/16 reach, 13/16 hex.
*These are colder heat range plugs for use in modified engines with higher than stock compression ratios.

Engine – Kohler K141 (6.25 HP), K161 (7 HP), K181 (8 HP)

Champion J8C ------------------------- 841
14mm, 3/8 reach, 13/16 hex.

Engine – Kohler KT17 Opposed Twin
Champion RV17YC --------------------- 25
14mm, .460 reach, 5/8 hex.

Engine – Onan 20 HP Opposed Twin
Champion RC14YC --------------------- 431
14mm, 3/4 reach, 5/8 hex.