3 point hitch for 782
 

Hallo
Since i live in Europe i'd rather build my own 3 point hitch. So after i have been gathering ideas for some months i have bought kubota lift package which include lift arms, top link and liftrods for the liftarms.
I have measured and drawn my plans into cad and i'm not sure if i need to change somethings, so any feedback is appreciated :)
One of the things i dont know the lenght of is the lift bar from the cylinder back to the liftrods, so if anybody knows how to make one that would also be great :D

My inspiration:
Lift bar
Cat 0 Hitch on My 1450 and his plans
Custom Wideframe Cat. 0 3 point
3 point on a QL 1000

It looks like your adjustable lift link is attached to your draft bar too far away from the tractor. See cub cadet lift diagram attached. this will increase the weight you can lift but greatly reduce the height you can lift it.

I dont have a 782 anymore to compare lift bar length for you. it may not matter since yours is in a different spot than the 782 three point from cub.

True, i will have to make new holes for the draft bar once it all it assembled. I might try to measure the distance for the lift bar once i have taken it apart.