Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   Tractor pullers using Cub Cadets! (https://www.onlycubcadets.net/forum/forumdisplay.php?f=12)
-   -   UK puller (https://www.onlycubcadets.net/forum/showthread.php?t=51045)

andyrobbo 01-07-2018 02:49 PM

UK puller
 
I am just starting to build a puller for my boy.
In the uk the rules are that we can only run stock engines in his age group up to 16hp so
What's the pros and cons to running hydro gearbox versus manual.

No one runs hydro here but then we will be first to run a cub in his class:bigthink: as they are in short supply here.
I know I will lose a little power by running hydro but will it stand up to the job,

Any advice welcome,

Thanks

john hall 01-09-2018 12:26 PM

Just bumping your post up so maybe someone will respond--only a couple guys on this site pull.
I doubt you will have any trouble with a hydro and a STOCK engine. The driveline is the first place it seems goes in heavy pulling. Shearing spiral pins, busting clutch discs, slipping clutches, tearing out "rag joints". Obviously you have no clutch since you have a hydro. Post what model Cadet you have.
Also, look at Midwest Super Cub--they sell lots of stuff to pullers, may help you wrap your head around things.

austin8214 01-13-2018 01:47 PM

Hydros typically don't perform well. The pump robs to much power from the engine. Gear drive is definitely the best way to go if you can find one.


All times are GMT -4. The time now is 02:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.