Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   Implements and Attachments (https://www.onlycubcadets.net/forum/forumdisplay.php?f=16)
-   -   60” Haban Mower Deck (https://www.onlycubcadets.net/forum/showthread.php?t=58520)

Cub Cadet 1782 04-06-2021 07:34 PM

60” Haban Mower Deck
 
I have a 60 inch Haban mower deck it is off of my 2082 cub cadet.

Recently I had to replace the bearings in the double center pulley in the middle of the deck, now that I have replaced them and put the pulley and spindle back together, the spindle and center pulleys are very tight after I tighten them up, the more I tighten the worse they get, they spindle and pulley don’t spin as free as the other pulleys. I was wondering if maybe I put the bearings back in the pulleys wrong or maybe I missed something when I put it back together.

RLause 04-06-2021 07:57 PM

Sounds like you are missing a spacer shim or washer, maybe it stuck to one of the old bearing races.

R Bedell 04-06-2021 07:59 PM

1 Attachment(s)
Sounds like you maybe missing a "spacer".


All times are GMT -4. The time now is 08:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.