Kohler Powered
2 Attachment(s)
If it's Kohler, it's got to be good, right? :ThumbsUp:
|
2 Attachment(s)
Picked up this little welder this week. Bought it from the original owner. He bought it new in '82.
|
4 Attachment(s)
Electric start fires it right off. Idles nice and runs smooth at 3700 rpm. As a bonus it came with the original spark plug and air filter. Still installed! :beerchug:
Looks like the head gasket's still doing it's job too! |
1 Attachment(s)
...and more!
|
1 Attachment(s)
Voltage at 3700 rpm.
|
3 Attachment(s)
No load.... and load. Not sure if this is OK. Any thoughts?:bigthink:
|
Must be running just a touch slow if your only getting 58 HZ. :bigthink:
|
That's what I was thinking Sam. Figured I'd play with the rpm and see how that changed things.
Thanks for the input. |
Needs to be 63 no load
Load 59-60. A guy who works for me used to be a gen set guy. |
Thanks Terry, I appreciate the information. The vibratach is not super a accurate so I can probably crank up the rpm and still be in the proper range. The killawatt meter is probably not the most accurate either...:bigthink:
|
All times are GMT -4. The time now is 12:51 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.