Only Cub Cadets - 782 3 point lift bar

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)

- Implements and Attachments (https://www.onlycubcadets.net/forum/forumdisplay.php?f=16)

- - 782 3 point lift bar (https://www.onlycubcadets.net/forum/showthread.php?t=61226)

Nozzlehead

05-18-2023 05:49 PM

782 3 point lift bar

SORRY GANG…left out the 3pt hitch part.

Can anyone please post a pic of a 782 lift bar FOR A 3 POINT HITCH with the overall length? I believe they’re different than the regular sleeve hitch lift bar. Thanks in advance

R Bedell

05-18-2023 08:36 PM

1 Attachment(s)

First, welcome to OCC........ :Welcome2:

You can simply use a straight bar, using the dimensions in the image. I have been using the straight bar on 782 for 20+ yrs.

darkminion_17

05-18-2023 09:40 PM

That red one is a lift bar for a 582.

Farmall450

05-18-2023 09:43 PM

I understand the 782 to use a straight one. Also, I think the smaller hole should be counterbored or sunk for the clevis pin head.

Farmall450

05-18-2023 09:46 PM

1 Attachment(s)

Here's what should fit a 1/2 clevis pin.

Nozzlehead

05-18-2023 10:11 PM

I need info on the correct one for a 3 point. I’ve got the numbers for the standard sleeve hitch. I believe they’re different

R Bedell

05-19-2023 06:23 AM

Quote:

I need info on the correct one for a 3 point.

Part Number: 703-0408

Sergeant

05-19-2023 07:29 AM

Quote:

Originally Posted by R Bedell (Post 525697)

Part Number: 703-0408

That Bar is for the traditional IH 3point That you use the Brinly hitch on
Are You Looking for That Bar or or the Cat O 3 Point Lift Bar 703-0811 ?

Farmall450

05-19-2023 09:54 AM

Quote:

Originally Posted by Sergeant (Post 525698)

That Bar is for the traditional IH 3point That you use the Brinly hitch on
Are You Looking for That Bar or or the Cat O 3 Point Lift Bar 703-0811 ?

He said he wasn't looking for the sleeve hitch one (I know the purists like to call the sleeve hitch/Brinly adapted setup a 3 point, but that was really a misnomer on IH's part by today's standards).

Nozzlehead

05-19-2023 11:22 AM

I’m installing the true 3 point set up; not the Brinly sleeve hitch. I gotta come up with the lift bar that runs from the hydraulic link under the tower back to the hitch plate

Nozzlehead

05-19-2023 11:25 AM

Quote:

Originally Posted by R Bedell (Post 525684)

First, welcome to OCC........ :Welcome2:

You can simply use a straight bar, using the dimensions in the image. I have been using the straight bar on 782 for 20+ yrs.

Does the true 3 point hitch plate take the same length as the sleeve hitch set up?

finsruskw

05-19-2023 12:55 PM

Sleeve hitch adaptor type lift uses lift bar #703-0408 and is for 782's w/ser #'s 719999 and lower w/IH cast iron differential housing.

Cat '0' type 3 point is used w/ser #'s 720000 and up used lift bar #703-0811 and the aluminum differential housing.

Two different animals.

Sergeant

05-19-2023 04:50 PM

Quote:

Originally Posted by Farmall450 (Post 525700)

He said he wasn't looking for the sleeve hitch one (I know the purists like to call the sleeve hitch/Brinly adapted setup a 3 point, but that was really a misnomer on IH's part by today's standards).

That's what I thought, but I was confused by Roland giving him the Part Number for the straight IH 3 Point Bar. I gave him the Part Number for the True MTD Cat 0 3 point Hitch Lift Bar.

I bet Aaron from Xtreme would give him the dimensions for the bar if He wants to make it himself. Aaron's bar is based On the OEM Cat 0 Lift Bar, not the IH 3 Point Lift Bar. If anybody has a standard Garden tractor with the MTD Made Cat 0, they could give him the dimensions as well for the Hydraulic Lift Models, used Bar 703-0811.

Farmall450

05-22-2023 05:46 PM

Quote:

Originally Posted by Sergeant (Post 525708)

That's what I Thought, But I was confused By Roland Giving him the Part Number for the straight IH 3 Point Bar, I gave him the Part Number for the True MTD Cat 0 3 point Hitch Lift Bar.

I bet Aaron from Xtreme would Give Him the dimensions for the Bar if He wants to Make it himself because Aaron's Bar is based On the OEM Cat 0 Lift Bar Not the IH 3 Point Lift Bar basically if anybody has a standard Garden tractor with the MTD Made Cat 0 they could give him the dimensions as well for the Hydraulic Lift Models used Bar 703-0811

It's public info when the repros are just the IH/CCC design.

Sergeant

05-23-2023 08:38 AM

Quote:

Originally Posted by Farmall450 (Post 525772)

It's public info when the repros are just the IH/CCC design.

I know it's public info, but Aaron already has the correct dimensions :ThumbsUp:

Farmall450

05-23-2023 03:17 PM

Quote:

Originally Posted by Sergeant (Post 525792)

I know it's public info, but Aaron already has the correct dimensions :ThumbsUp:

Yup, I was agreeing with you.

All times are GMT -4. The time now is 12:56 PM.