3pt hitch dilema
 

I have a complete, new in box, 3 point hitch assembly, part number on box is, 190-365-100. I cannot find what it fits. I thought it was for the 3000 series Cubs. My computer skills are very basic, and was hoping someone with more knowledge could help figure out what this is.

Thank you

Your are correct in that your 3pt hitch is for a Cub Cadet 3000 series. Is it for sale?

That fits the early 3k tractors with the aluminum rear and dual disk brakes. Very sought after and if complete will bring $500+.

Just like ejl.....is it for sale?:bigthink:

Thank you for verifying fit of 3 point. I will not be using it, as I have supers with the 3 point. It is for sale.

It should contain all these parts if complete

https://www.cubcadet.com/en_US/conte...308091d0c74e/y

it is still in box so i assume it is complete

Looks like it fits the GT3204 and GT3235 for sure
How in the world did you wind up with that??

bought out a dealer years ago,this was with everything else i got

It fits the 3240 as well which is the 40th anniversary model.

No, 3240 has single inboard brake. This model only fits the very early cast AL transmissions with dual disk brakes. 98 and maybe 99 model years.

True but I believe Fins saw it on the parts look-up. They show that kit on several models that I don't think it will fit on.

If the Break controls our outside the Frame, The 190-365-100 will fit. The reason for the redesign to 190-207-100 was the Break control being put on the Inside of the Frame would infer with placement of the Hydraulic Lift cylinder. But the 190-207-100 will fit all models of the 3000 series produced. That was the only nice thing about the later 190-207-100.

What is funny about the 190-365-100 is, MTD Made a Lot more spare Parts for that 3 point kit than they did for the Later 190-207-100.

But the 190-365-100 was originally made for the aluminum Transmission cases
I prefer the rocker shaft from the 190-365-100 as the Brackets for Mounting the rocker shaft to rear hitch are not separate from the rocker-shaft I had finsruskw Fabricate the Rocker shaft Brackets for the 190-207-100 rocker shaft and a New rear Hitch Plate for the 190-207-100 3 point kit Thanks to the help Oak & Other Members here.

The 190-365-100 is a Much simpler design for the 3 point hitch compared to the 190-207-100:ThumbsUp: