Cub Cadet Narrowframe Carry All
 

Hi does anyone have good plans or pics of a carry all for a Cub Narrowframe? I have a CC 72 that I use for yard/garden work and would be nice to fab something up to just haul around stuff without the wagon. I don’t have a rear lift assembly like a sleeve hitch. That’s something else I’d like to fab up, but one thing at a time I guess lol. Thanks!

You could build or buy a trailer hitch adaptor for your cub. The picture I am posting was made by a Richard Christensen. Not sure if sells them, but a think you could find one to buy with a google search.

http://www.ihcubcadet.com/forum/mess...tml?1272925488





Randy

Randy,
I think he means one of there...
this guy may give you some drawings.

http://www.xtrememotorworks.com/

And my tiny nipples went to France...

:ExtremeFunny:

Yeah, somehow I'm doubting Aaron is going to give out any info. He would gladly sell you one that he makes though!

Home Depot sells this for the Cub XT for $70. You could probably easily modify it to fit your needs.
https://www.homedepot.com/p/Cub-Cade...9100/300997797

I built this one several years ago. I’ve since traded it away. I hinged it and added a handle to allow dumping it from the seat. You may have to get creative attaching a carry-all without the rear lift.

Here's one I built a while back. Had some scrap laying around, and felt energetic that day. I guess...:biggrin2:

http://www.onlycubcadets.net/forum/s...ad.php?t=26673

Add this

https://www.harborfreight.com/atv-hi...ter-65961.html


and this



https://www.harborfreight.com/automo...ier-66983.html



or I like this one better




https://www.harborfreight.com/automo...ier-69858.html

Thanks I really like that setup. That would work great for my purposes

Thanks , I envisioned something along those lines if I had the rear lift. Reminds me of a mini dump truck. Would be really handy around the yard/garden. I can’t seem to find a lift tho.

Looks sweet! I’m confused tho how does it attach to the axle tho? Or maybe I’m looking at the pics wrong. Are there holes to thread bolts into on the underside of the rear axle? Sorry I’ve never even looked under there

Here is a carry all that was a Father Son project.

The boards are designed to slide off and on. I have 2 sets-one for working and one for going to shows. The boards are 2 inch wide hard wood floor that I help Dad install when I was 9-10 years old.

My carry all is designed to use on a rear sleeve hitch. I have had four 40 pounds bags of salt on it.

Sorry, I should have explained. The "carryall" slides under the axle tubes, and a piece of flat stock over the top with two 3/4" inch bolts holding each side. One through the front, and one in the rear.

This attaches to the lower portion of the three point hitch, and attaches with quick pins.
https://s18.postimg.org/uhity71op/DSC04212.jpg

.This goes on the bottom of axle tubes, and one hole is forward of tube, and one aft. Then a plate on top with the bolts through the holes, sandwiching the two together.
https://s18.postimg.org/crh5d6iyx/DSC04213.jpg
Sorry man, I ain't much for splainin things.:biggrin2:

Ooo I see now, that makes more sense haha. Thanks a lot for clearing that up. Looks that that would be a pretty strong design.

My custom built carry all.