Quiet Line Ignition Switch
 

A short time ago I was reading a thread about QL ignition switches and after more than two hours of searching now I can't find it.

My question is:

Does anyone know what the correct NAPA part number is for a Quiet Line ignition switch.

Thanks Guys

Crap, I posted this in the wrong place, why can't I delete it?

I do do do, a da da da.

#7-01854

Thank you Lew!

Put some dirty words in your first post and it WILL get deleted for you.:biggrin2:

You are a very good friend but, you really are ate up aren't you?

What is your first day of the seal the same as one of those guys that spends a lot worse, ?

I thought so...

Thanks again!

Got it moved for ya, Mark. :beerchug:

LMAO, maybe I should try that.

Thank you Allen, I appreciate the help.

And thank you Lew, picked up the new switch, installed it and now not only will it start and drive but the key will stay in the switch.

It's amazing how much of a PITA it is to have a key that won't stay in the switch!

How about this....took me 30 seconds to find it.

http://www.onlycubcadets.net/forum/showthread.php?t=34201&highlight=Ignition+Switch

:biggrin2: LMAO Lew.

I've got one of those! It is a PITA!

Mark, you had two threads so I merged them together. The order is a little out of whack, but it's all in one spot now......

I had trouble finding a 4 prong key switch local for my 1200. Everything I came across was 5 prong. Didnt matter anyway, my 4 prong connector on the harness was melted. I ended up using a 5 prong switch instead and just didnt use the extra prong. Had to do a little modification on the prong connections, but once you pin out the harness and the switch with a meter it was easy to do. Thanks, TB

When I click that link it says:

"No Thread specified. If you followed a valid link, please notify the administrator"

:Huh: It worked yesterday unless some Moderator done some switchin' around....:biggrin2: