Rubber engine mounts
 

hi im looking for the rubber engine mount for a cub cadet 1211 any place i can find them thanks

these parts are not made any more part numbers 722 3003 and 722 3002 any other ideas where to look thanks for the link

Right place, part not available there anymore :biggrin2:

OP: Post an add in the Wanted Section or go through a sponsor at the top of the page :beerchug:

it was a good try lets see if i can get the picture

Wouldn't these be the same mounts as used on the Q/L Series..??:HeadScratch:

I think you could use: CC759-3952 ISO Kit

Attachment 54233 this

I'm not sure the new rubber ones for the 1650 may. Any body know?

Try this, these are for a 1250 AKA QL same thing.

http://www.partstree.com/parts/?lc=c...&dn=0019100003

That's a good question. They look the same as the QL Series, but I didn't know they used them after the QL's. I know they changed them up a bit for the 1989 1050 and some others, but they also changed the mount, as well.

Yep Cub used pretty much the QL engine mount in the 1210, 1211 ask me how I know.

Good to know, thanks! :beerchug: For some reason, I would have thought that the 1210/1211 used the same style as the 1050 but the more I look around, the less and less I see the 1050 style mounts used. Guess you learn something every day, and it seems as though most days I learn it from this site!

so the verdict is my new ones for a 1650 will fit my 1211 right and also thanks for all the help

Only other option I can think of is solid mounts. One of out memebrs makes them.
http://www.onlycubcadets.net/forum/s...ad.php?t=20875

Scroll to pic # 9

I have QL mounts on my 1211 work fine.

If your dead set on the rubber mounts, yes the QL ones will work on the spread frame models also. I say save the expense and go solid. No more fuss, cheaper.

then ill make out i got a new set for my 1650 about 4 years ago so ill use them thanks for saving me money and the info