Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   Cub cadet 122 resto (https://www.onlycubcadets.net/forum/showthread.php?t=18039)

MrGitrdone41 05-19-2012 11:07 PM

Cub cadet 122 resto
 
1 Attachment(s)
Ok guys here the thread on the resto. Today i toke the fenders off and cleaned out the big mouse nest on the trans and degreased the trany and frame . Than split the tractor and once more degreased the trans. The paint looks great on the trans too! That is all i did today. I'll upload pics tomorrow.

ACecil 05-19-2012 11:14 PM

Thanks for the pics. Looking forward to your progress.

brucer95 05-19-2012 11:17 PM

Nice job, your not wasting any time are ya. Im looking forward to this thread and starting my own 122 resto soon. Still in collecting parts stage now. Great job and good luck to ya!

Methos 05-20-2012 01:55 AM

Quote:

Originally Posted by ACecil (Post 134271)
Thanks for the pics. Looking forward to your progress.

Same here!:beerchug:

MrGitrdone41 05-20-2012 07:05 PM

2 Attachment(s)
Well i got some more stuff taken off today. My buddy helped me out with it got alot done but made a mess out of the shop tho lol! I also went thew the trans and clean all the nastyness out of it.

Attachment 24789


Attachment 24790

zippy1 05-20-2012 07:13 PM

Well your really going to town on that 122. Nice to see another one coming apart to go back together. FYI don't forget to put your nuts and bolts in a marked zip lock to make it easier putting it back together.

ACecil 05-20-2012 07:13 PM

Appreciate the pics, Sam. Looks like you're off to a great start.

johncub7172 05-20-2012 09:31 PM

Looking forward as well, you made a great start so far! When supers were just some high in the sky dream, these tractors ruled! Sorta like the Beach Boys eara in my opinion! You cant stomp out old school, no way. Good luck with the IH Cub Cadet 122! ~peace out!:bigeyes:

MrGitrdone41 05-21-2012 10:25 PM

Thanks for the comments guys!
I did some work on the hood and it has more pits than the moon! I Bondo the bad areas and i hope the primier fills in the rest. No time for pics but i'll have a vid up soon of it.:beer2:

Methos 05-21-2012 10:39 PM

Sam the updates are looking good!

ACecil 05-21-2012 11:28 PM

Thanks for the update, Sam!

MrGitrdone41 05-30-2012 10:44 PM

I'm sorry i have not updated in a long time but i got the footrests painted and the hood done but you can see the bondo thew the paint! I'm going to get a other hood and get a seering coloum and wheel. I've been working that is y i have not worked on it in a long time but i found out that the place i work it is a Kohler dealer!:beer2: That means 10% off parts! Yes!
I'm going to done some more work tommow so i'll take some pics guys!

ACecil 05-30-2012 11:05 PM

Thanks for updating us on your progress!

MrGitrdone41 06-04-2012 10:08 PM

3 Attachment(s)
Here is a update. I got one fender primed and i started thinking about paint. I was going to go with CaseIH paint but i saw some were on the forum that Trasport Yellow from TSC is a match to Federal yellow. So what do you guys think i should use? I'm using a gun to paint but i bought a spay can of Transport to try it. I tryed it and it is about a match!

Attachment 25375

Attachment 25376

Attachment 25377

ACecil 06-04-2012 11:07 PM

Nice Sam! Thanks for the update.

Methos 06-05-2012 11:15 AM

Sam thanks for the update! If your going to spray with a gun use the paint code from the tech section of the site and the correct match.:TwoCents:

http://www.onlycubcadets.net/forum/showthread.php?t=19

MrGitrdone41 06-05-2012 10:25 PM

Thanks Allen!

Thanks Duke! That will help alot thanks!

MrGitrdone41 06-07-2012 11:04 PM

I got some more things primed today. Slow but sure i hope it will be done the end of summer.Sorry no pics:bash:

Methos 06-08-2012 05:05 PM

Quote:

Originally Posted by MrGitrdone41 (Post 137638)
I got some more things primed today. Slow but sure i hope it will be done the end of summer.Sorry no pics:bash:

Keep plugging away at it Sam and you'll get it done!

MrGitrdone41 06-08-2012 09:50 PM

Quote:

Originally Posted by Methos (Post 137728)
Keep plugging away at it Sam and you'll get it done!

Thanks Duke.

MrGitrdone41 06-10-2012 08:02 PM

3 Attachment(s)
Well guys i toke a ride up to CubCrazy's today to buy some parts so i bought a 3pt,creeper,grille,brinly plow,manuel lift. The 122 is going be loaded now! Now for the pics!

Attachment 25544

Attachment 25545

Attachment 25546

Cubcrazy 06-10-2012 10:32 PM

Looking good Sam!!
It was nice to finally meet you! You will have to come back sometime!

ACecil 06-11-2012 12:49 AM

Nice finds, Sam! I know, Mike took care of you. :beerchug:

Methos 06-11-2012 11:09 AM

Quote:

Originally Posted by ACecil (Post 138137)
Nice finds, Sam! I know, Mike took care of you. :beerchug:

It's always fun going to Mike's place! Did you get to meet Eric as well? Both are great guys!

MrGitrdone41 06-11-2012 08:02 PM

Quote:

Originally Posted by Methos (Post 138171)
It's always fun going to Mike's place! Did you get to meet Eric as well? Both are great guys!

I just meet Mike yesterday. It was a great time!

MrGitrdone41 06-11-2012 08:03 PM

Quote:

Originally Posted by Cubcrazy (Post 138111)
Looking good Sam!!
It was nice to finally meet you! You will have to come back sometime!

You to lol! I'll be back lol! How is the 169?

MrGitrdone41 06-16-2012 10:20 PM

2 Attachment(s)
Ok guys i have a update on the 122. I got the dash,trans in primer and i finilly used the boom to lift up the trans to paint it. It worked great i still don't trust it yet but it works good. Soon I'll have to make a trip up to CaseIH dealer to buy paint. How much is a gallon of Federal yellow?


Attachment 25771 Attachment 25772

Cubcrazy 06-16-2012 10:22 PM

Quote:

Originally Posted by MrGitrdone41 (Post 138251)
You to lol! I'll be back lol! How is the 169?

It's still sitting where you left it! :biggrin2::biggrin2:

Cubcrazy 06-16-2012 10:23 PM

Looking good Sam!:beerchug:

MrGitrdone41 06-16-2012 10:23 PM

Quote:

Originally Posted by Cubcrazy (Post 138893)
It's still sitting where you left it! :biggrin2::biggrin2:

wow lol! It was sweet driving it man the power is unreal!

ACecil 06-16-2012 10:52 PM

Very nice, Sam!

MrGitrdone41 06-21-2012 01:43 PM

1 Attachment(s)
I've got some updates on the 122. I got half the frame down to bare metaland drilled the holes fora hydro lift hehe:biggrin2:. I have vid i'm going to upload soon on it. I'm also going to ride up to the CaseIH dealer to get the paint and Hytran and filter for the 1812. It should be in paint next weekend than it's time to take to motor out to Lakota racing to get bored. It will be done soon!



Attachment 25920

ACecil 06-21-2012 05:23 PM

Appreciate the update, Sam.

MrGitrdone41 06-26-2012 09:28 PM

1 Attachment(s)
I got the paint and reducer! It should be in paint by next week! went to
Napa to buy the reducer and the Qt is 14.99$ and the gallon is $51.99! I bought a Qt of CR233 med reducer. I'll have to have a day with low humity to paint.

Attachment 26130

ACecil 06-26-2012 10:51 PM

Cool deal, Sam! I bet, you can't wait to get it painted.

cubcadet 06-27-2012 10:46 AM

cub cadet 122
 
cool sam post another vid please:beerchug:

MrGitrdone41 06-27-2012 09:31 PM

I will! lol

cubcadet 06-28-2012 08:22 AM

cub cadet 122 resto
 
sam you said you met mike/cubcrazy right he sounds like a good guy me and him are talking and i might buy his #2 cart i already have 2 of them but i want one thats not painted mine are both painted:beer2:

MrGitrdone41 06-28-2012 05:47 PM

Quote:

Originally Posted by cubcadet (Post 140643)
sam you said you met mike/cubcrazy right he sounds like a good guy me and him are talking and i might buy his #2 cart i already have 2 of them but i want one thats not painted mine are both painted:beer2:

He is a nice guy. I saw the carts but i forget about looking at them lol. He has so much it's unreal! His place is super easy to find just look for cubs lol. I'll be going back up soon to get more parts lol! :biggrin2:

MrGitrdone41 07-05-2012 03:15 PM

here is a link to my new vid
http://www.youtube.com/watch?v=EN0W6...1&feature=plcp


All times are GMT -4. The time now is 02:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.