Just Picked Up A Few Things
 

drive shaft and clutch from a (O)
lift pump. rear lift parts . front 6" wheels/tires and 2 sets of 12x6 wheels and tires. also a NF front blade (not in the pics) sorry my bad..

also picked up a k301 the other day from " mrcubcadet "

Congrats Doug!

Nice finds, Doug!

Great items to have on hand. You're going to enjoy that lift on your cub! Mrcubcadet is really neat to talk to and his prices are always very reasonable.....super member! Thanks for sharing your pics.

Cub Cadet 123

Nice haul :beerchug:

I notice the K301 has the correct "lean" sitting on the pan. :ThumbsUp: That's also the correct muffler too. Do you have the heat shield to support the muffler?

Jeff

I hope so..

Here's the one on my 125

http://img.photobucket.com/albums/v7...h_DCP_5004.jpg
click for big pic

do I need to replace the rockshaft in my 125 to use the Hydro pump?

http://www.ebay.com/itm/Cub-Cadet-ga...item20c539dd01

Either replace or cut the welds and bolt that onto your rock shaft. Eitehr way you need that rock shaft.

The Ebay ad says it will fit an electric or hydraulic lift , but i am thinking they are different ??? Seems i remember they each have a specific bend for thier application. I think all three lifts are different , manual/elec./hydraulic.

You might double check , don't want to see you spending your money on something and it not work.

4SPEED , YHM. Thanks , Darrell

That one on e flay is for an e lift.
Here is what I have.
First picture is of the one just like on flea bay
The second ,the one on the right is off a 122.cut off the lift arm sloppy
The third is off a 124.The 124 uses the same bracket as the 122 as it bolts on to the rock shaft using the same holes a 3 point lift block attaches to.
The fourth one is for how it attaches.

http://i899.photobucket.com/albums/a...lePics2116.jpg

http://i899.photobucket.com/albums/a...lePics2117.jpg

http://i899.photobucket.com/albums/a...lePics2120.jpg

http://i899.photobucket.com/albums/a...lePics2118.jpg

Thanks mate, now witch one are you selling me for my 125 ?? I dont want to cut mine up, but will if need be. the manual shows where to cut it.

Those are for presentation purposes and are not for sale.You need measurments to make one I will do that yes indeed.