Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)
-   -   What did you do with your Cub Today? (https://www.onlycubcadets.net/forum/showthread.php?t=139)

ACecil 07-30-2013 10:54 AM

Quote:

Originally Posted by zippy1 (Post 208333)
You better slow that 782 down Allen, or the next thing is the law will be chasing behind you :beerchug:

Looking good John:beerchug:

You're right, Todd. That 782 will get down the road! :beerchug:

nikster 07-30-2013 05:55 PM

Seat Time
 
Got 150lbs. of fertilizer-20/0/2 spread just before the rain. I
hate zebra stripes so I cut down the spread rate to 1/3 the drop & ran the cubby over & over & over to ensure a good no stripe drop.
I normally would of spread 250lbs., but?

So as an end result i tracked over my yard 3 times when 1 time would have done it.

Finished spreading & the rain came 10min. later.

Dont trust myself?:biggrin2:

http://i210.photobucket.com/albums/b...ps1b08c646.jpg

mharrison 08-02-2013 10:44 PM

I ordered set of deestone tri ribs for the 782 today. bought the 3/4 spindles off Ebay yesterday. And picking up a set of narrow rims in the morning. I can't wait to get them on the tractor and try em out. :biggrin2:

Oak 08-02-2013 11:05 PM

1 Attachment(s)
Well I was mowing the grass and all of a sudden I hear clunk, bam, grrr, the deck lifts up in the air and slams back down and this is what I sent through the deck. The front roller fell off and the blades did a number on it. Had to break out the BFH and adjust it a little to get it to fit back. Guess I didn't put loctite on the nuts.:bash2:

Diz Jr. 08-02-2013 11:23 PM

Make sure to get us some pictures of the new tires mharrison

Oak, i bet that made a racket. Hope it didn't tear up to much.

zippy1 08-02-2013 11:51 PM

Quote:

Originally Posted by Oak (Post 208928)
Well I was mowing the grass and all of a sudden I hear clunk, bam, grrr, the deck lifts up in the air and slams back down and this is what I sent through the deck. The front roller fell off and the blades did a number on it. Had to break out the BFH and adjust it a little to get it to fit back. Guess I didn't put loctite on the nuts.:bash2:

That sucks:bash2: I hate them noises like that.
How bad did it mess up the blades?

Cubcrazy 08-03-2013 08:00 AM

What cub was you mowing with Todd?:bigthink:

Oak 08-03-2013 09:29 AM

1 Attachment(s)
Diz & Todd, I got lucky and it didn't bend the blades. Everything seems okay so far.

Mike, I only use the 3205 to mow with. The power steering and tight radius kinda got me spoiled.

ACecil 08-03-2013 10:06 AM

Glad there was no damage, Todd.

Cubcrazy 08-03-2013 02:57 PM

Quote:

Originally Posted by Oak (Post 208980)
Diz & Todd, I got lucky and it didn't bend the blades. Everything seems okay so far.

Mike, I only use the 3205 to mow with. The power steering and tight radius kinda got me spoiled.

OK, I know I didn't recognize the part. hehe
I see why that would get you spoiled! Nice tractor!


All times are GMT -4. The time now is 03:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.