Originally Posted by fleetlines (Post 201135)

I managed to get in the first coat of yellow. Instructions on the can said to let it fully dry before the second coat.
Using a new gun I thought the gun wasn't working right. Managed to get a few runs before chasing down the problem. I lowered the air pressure the other day when I got rained out and must have raised it when I filled a tire. Thinking it was still at 50 lbs. I found it at 85 today. I must have gave it a little bump to speed things along there. The gun survived me disassembling it several times and is working well.
I'm using Majic paint and it flows well and has good coverage.

Originally Posted by fleetlines (Post 201588)

Here's the pics. I got a couple runs but may let them go. They are not to bad and in good places if I have to sport a couple runs. They didn't turn out in the pics. I will need to do the white again because it's to thin on the back side of a wheel. I dropped the ball with getting the seat welded but took it to bare metal and painted it anyway. It will get welded when I get to the deck. I'll wait to reshoot the white when I do the deck. The last shot is of a robin in a nest. I stuck the burlap sack up to keep it from any overspray. It's folks have gotten quite used to me but are camera shy.