| Methos |
05-07-2012 01:25 AM |
I replaced the ISO mounts on the 1650 today. The fan was broke so I got one off the shelf and installed it. The bushing ball was worn so bad it was flopping around and the only thing holding it in place was the rag joint! One of the holes on the rag joint was torn so I got to it at just in time before the rag joint gave out.:OhOh: I installed a new autolite 216 while I was at it and changed the oil. I changed out the pto cutch as it was always engaged. Once I double checked the air gap I and seen it was set right I changed it out. It's good to have spare parts!
I want to thank Todd aka Oak for hooking me up with the bushing balls last year. Thanks Buddy!:beer2:
|
