Only Cub Cadets
Page 29 of 49 « First 19202122232425262728 29 30313233343536373839 Last »
Show 40 post(s) from this thread on one page

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   100 Face Lift (https://www.onlycubcadets.net/forum/showthread.php?t=13735)

zippy1 02-21-2012 10:15 PM
Quote:
Originally Posted by darkminion_17 (Post 117699)
I think I would rather take out the parts you mentioned instead.

Looking good with the bling
Ok, maybe. But I'm doing it pretty much one handed at times, and hanging on with the other so I don't fall out of the chair, it's a drag for sure:biggrin2:
These NF's don't leave alot of room for anything, plus I'm being extra careful so not to scuff up the paint.
But you're right, going to the dentist isn't fun.

jbrewer 02-22-2012 11:39 AM
Wow
 
That's one heck of a "face lift".... :-)

Looking GREAT

John

PS: Any leaks when you hoist the front like that or is the trans empty?

zippy1 02-22-2012 07:29 PM
6 Attachment(s)
Re-fabed the seat mounts. I had a problem with the seat rubbing the fenders before, so a little extra height took care of that.
Also, what are the reflectors supposed to be finished like? I got the rust off, but have nothing (clean) to compare them to.

ACecil 02-22-2012 09:59 PM
Great pics, Todd! You're doing a top notch job!

Methos 02-23-2012 10:24 AM
Quote:
Originally Posted by Sugarmaker (Post 117501)
Todd,
Your going to have to throw a blanket over that at night. The glow will keep the neighbors awake!:) Man that is coming together nice. Is that stainless or chrome fasteners? I like the addition of the acorn nuts to cover the treads. Your going totally bling on us here!
Great close up detail shots of the sweet 100!
Regards,
Chris
Quote:
Originally Posted by zippy1 (Post 117522)
Thanks,
Chris, I only used stainless with the acorn nuts, everything else is new bolts, nuts and washers. I know it's not the original IH hardware, but I wasn't intending a full blown restore, just a "Face Lift"
I used acorn nuts on my #40 box blade and love the look they give and it's great not having threads to snag the pants legs too. Awesome work Todd!

zippy1 02-24-2012 07:02 PM
Quote:
Originally Posted by jbrewer (Post 117753)
That's one heck of a "face lift".... :-)

Looking GREAT

John

PS: Any leaks when you hoist the front like that or is the trans empty?
No leaks, but everything is empty.
But I always do the same with all my tractors to clean out the grass in the decks. Just don't raise them up from the back.

zippy1 02-24-2012 07:03 PM
1 Attachment(s)
Once again. Does anyone know what the finish should be on the reflectors?

Methos 02-24-2012 07:42 PM
Quote:
Originally Posted by zippy1 (Post 118162)
Once again. Does anyone know what the finish should be on the reflectors?
Chrome as they are now.

Cubcrazy 02-24-2012 07:46 PM
Looking great Todd!:beerchug:

zippy1 02-24-2012 08:28 PM
Quote:
Originally Posted by Methos (Post 118176)
Chrome as they are now.
Duke, they were all rust, I just wire wheeled them, it's pretty much bare metal.


All times are GMT -4. The time now is 02:50 PM.
Page 29 of 49 « First 19202122232425262728 29 30313233343536373839 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.