|
1 Attachment(s)
I ended up restoring the original rims that came with the tractor. 4 coats of paint, 4 new sealed heavy duty bearings, new valve stems, and 2 new 3 rib Ag tires. Trying to decide if I want to leave the wider ones on there, or use these restored rims with Ag tires? Hmmmm
Attachment 100976 |
1 Attachment(s)
More pictures:
Attachment 100977 |
1 Attachment(s)
More pictures:
Attachment 100978 |
I like the wider tire. Have them on my 127. A good popular tire with Cubs.
:beerchug: |
Quote:
|
Quote:
|
Nice wheels that's are tough choice I like narrow rims up front but wide tires look nice and offer certain advantages nice work:beerchug:
|
Great job! I also like the tri ribs better.
|
1 Attachment(s)
Got the tri ribs installed on the 70 today!
Attachment 101055 |
1 Attachment(s)
Another angle:
Attachment 101056 |
1 Attachment(s)
Last picture:
Attachment 101057 |
What a excellent job you did! Truly a work of art! :beerchug:
|
Quote:
|
Your 70 looks great! :ThumbsUp:
|
Great job.:beerchug:
|
2 Attachment(s)
Well.........I said I was done, but I was just taking a break! So I’m working on the dual rear wheels on my “70”. Just need to sand down, paint, and mount the tires. Just finished up painting the dual wheel spacers.
Attachment 101493 Attachment 101494 |
2 Attachment(s)
|
Very nice! :beerchug:
|
Quote:
Randy |
Quote:
|
Man I want a dually setup so bad. Once I buy a deer property, that will be one of my first items is a GT with PTO so I can run a tiller for small food plots and dually wheels. Nice job!
|
You will constantly have wheel tracks in your freshly tilled ground w/duals.
Would not make for a very good looking till job when finished. If anything, you will need some weight up front. Them tillers are heavy! |
Quote:
Once I’m done, I will post up some finished pictures. |
3 Attachment(s)
Got some pictures of my new air cleaner base (larger air filter, better air flow), new air cleaner cover, new custom made spark plug wire (stranded copper core), and re-jetted carburetor:
Attachment 101710 Attachment 101711 What I removed: Attachment 101713 |
1 Attachment(s)
One rim and tire completed! One more to go:
Attachment 101795 |
Nice work!!!! You give me inspiration to get my stuff done.
|
Quote:
Best of luck! |
Looking good!
|
4 Attachment(s)
Got the dually adapters and dually adapters lug bolts on:
Attachment 101959 Attachment 101960 Attachment 101961 Attachment 101962 FYI, for those of you who didn’t know, you can NOT mount the outer dual rims/tires with the mower deck on. The outer duals hit the mower deck wheels/mounting bracket. So the mower deck must come off to mount the outer duals. |
Nice work. Can’t wait to see the tractor with duels!
|
Dueling wheels.….
This ought to be interesting!!:bigthink: |
Dually Adapter Part Numbers
Had a request for the part numbers for the dually adapters, end plates, and lug nut/lug bolt set. These dually adapters are made for different rim/tire combinations, so that being said, the following parts number are for the “6-12” rim/tire setup ONLY. These are the 7” option.
These are purchased through www.extrememotorworks.com. • CC-01-001-700W (round 7” dually adapters 2 are included) • CC-01-050 (round cover end plates 2 are included) • CC-01-048 (Cub wheel stud/nuts 10 are included) I hope this helps! |
Dually Wheels are Installed
2 Attachment(s)
Finally got the dually wheels installed today! I also added valve stem extenders from the inner tires to one of the wheel weight holes so I can check both pressures from the outside wheel. One picture shows the stainless steel braided valve stem extender and a second picture of the outer rim face shows the two “Cub Cadet” valve stem caps.
Attachment 102089 Attachment 102090 |
2 Attachment(s)
|
2 Attachment(s)
|
4 Attachment(s)
|
The duals look great, nice work!
|
Quote:
|
2 Attachment(s)
|
Duals and a stack, looks great!
|
| All times are GMT -4. The time now is 06:33 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.