Only Cub Cadets
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   IH Cub Cadet Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=9)
-   -   149 Trunion Plate Removal (https://www.onlycubcadets.net/forum/showthread.php?t=52233)

csgillaspy 05-31-2018 04:50 PM
Quote:
Originally Posted by flatpickerray (Post 454677)
Looks like you need to replace the cork gasket. When you pull the hydro unit out to do that, take the unit somewhere and have it welded or weld on the new plate yourself. I've done a couple like that, as someone stated wrap a wet rag around the arm to protect the seal.
its all from old leaks, I don't see any new leaks. I was going to replace it anyways while I had it apart but I forgot to get on when I ordered all my stuff the other day:bash2:

twoton 05-31-2018 08:21 PM
Quote:
Originally Posted by csgillaspy (Post 455352)
.... cut it off and weld it (the new one) on.
:ThumbsUp:

csgillaspy 06-03-2018 05:56 PM
3 Attachment(s)
So got the new plate welded on and when I put the Chevy emblem plate on, it's compressing the springs to where the caps don't touch the plate. I hate to have to buy a new plate on top of it, but looks rough.
What do you Think? Usable with some repair or definitely need a new plate?

darkminion_17 06-03-2018 07:51 PM
Looks like you need a new cam plate, at least one that is betterer.

finsruskw 06-03-2018 07:55 PM
You did that???!!!
Or was it like that when you got it??
What an abortion!!

darkminion_17 06-03-2018 07:59 PM
Looks like one of your jobs Dave.

Just kidding, That is the first time I seen that type of repair.

Jeff in Pa 06-03-2018 08:00 PM
Quote:
Originally Posted by finsruskw (Post 455673)
You did that???!!!
Or was it like that when you got it??
What an abortion!!
I've never seen one like that. :bigeyes:

twoton 06-03-2018 08:17 PM
Little file work and you should be good to go!:ThumbsUp:

csgillaspy 06-04-2018 03:06 PM
That's the way it was when I got it. Looks like someone went to town on it

Terry C 06-04-2018 03:48 PM
Quote:
Originally Posted by finsruskw (Post 455673)
You did that???!!!
Or was it like that when you got it??
What an abortion!!
Wouldn’t even make the top ten of PO mods I’ve seen.
I thought it was a good try at a repair. :biggrin2:


All times are GMT -4. The time now is 03:46 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.