Only Cub Cadets
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   Implements and Attachments (https://www.onlycubcadets.net/forum/forumdisplay.php?f=16)
-   -   WF Mule drive pulleys (https://www.onlycubcadets.net/forum/showthread.php?t=31519)

OffTime 04-24-2014 05:03 PM
I don't really care if they have bad bearings or not. I have easy access to bearings. If someone would have a set of pulleys that you would be willing to part with, PM me and give me a price. Having the snap rings included with the pulleys would be nice as well, but not necessary. Thank you.

Sam Mac 04-24-2014 05:15 PM
2 Attachment(s)
Quote:
Originally Posted by Sam Mac (Post 257019)
Not sure but I may have a couple in need of bearings, gotta dig through my stash of stuff that looked like it was to good to trash that I have no use for but I better save it cause I may need it someday. One of the reason our shops are too small. :biggrin2:

I will report back with my findings.:beerchug:
Well it turns out that the PO had the correct pulleys in the extra parts that came with the 149 when I picked it up. I also have one with no bearing. :beerchug:

OffTime 04-24-2014 05:22 PM
Quote:
Originally Posted by Sam Mac (Post 257085)
Well it turns out that the PO had the correct pulleys in the extra parts that came with the 149 when I picked it up. I also have one with no bearing. :beerchug:
Sam, I would take two of the three. You choose whichever one you would like to keep and PM me with a price for the other two, if you are willing to part with them. Thank you.

darkminion_17 04-24-2014 05:41 PM
I think Sam is keeping his, :bigthink:

I called the local case ih dealer and they want $87 each, wowza

Sam Mac 04-24-2014 05:45 PM
Quote:
Originally Posted by OffTime (Post 257087)
Sam, I would take two of the three. You choose whichever one you would like to keep and PM me with a price for the other two, if you are willing to part with them. Thank you.
Quote:
Originally Posted by darkminion_17 (Post 257093)
I think Sam is keeping his, :bigthink:

I called the local case ih dealer and they want $87 each, wowza
Sam is keeping at least 2 of the 3. I may consider selling the one that needs a bearing. Bearing number on the other 2 is NICE 7842-5, that probably would not include the spacer that fits into the bearing bore.

OffTime 04-24-2014 07:31 PM
Quote:
Originally Posted by Sam Mac (Post 257094)
Sam is keeping at least 2 of the 3. I may consider selling the one that needs a bearing. Bearing number on the other 2 is NICE 7842-5, that probably would not include the spacer that fits into the bearing bore.
As a matter of fact, I think I have a bushing that goes into the bore. I'll handle the bearing easily enough. You consider selling me one?? I could at least put that one on the load side and maybe locate another one somewhere else along the way. I checked McMaster Carr and didn't find what I was looking for.

Is there anyone else that has one for sale? Lew, what about the ones you had pictured? Any other leads anyone?

Sam Mac 04-24-2014 07:38 PM
Quote:
Originally Posted by OffTime (Post 257119)
As a matter of fact, I think I have a bushing that goes into the bore. I'll handle the bearing easily enough. You consider selling me one?? I could at least put that one on the load side and maybe locate another one somewhere else along the way. I checked McMaster Carr and didn't find what I was looking for.

Is there anyone else that has one for sale? Lew, what about the ones you had pictured? Any other leads anyone?
Sent you a PM about the pulley

Sam Mac 04-24-2014 07:48 PM
I'll take the one without the bearing to the machine shop and find out what it will cost to make a few for you guys.

OffTime 04-24-2014 08:14 PM
Great idea, Sam. I was thinking of turning out a pair on my own lathe, but I didn't have a pattern to go off of, so I was kind of lost there. Keep us posted with any updates. Thanks.

darkminion_17 04-24-2014 08:18 PM
Quote:
Originally Posted by OffTime (Post 257119)
Is there anyone else that has one for sale? Lew, what about the ones you had pictured? Any other leads anyone?

You would be better off with a used one. The ones I have are not for sale.:BlahBlah:


All times are GMT -4. The time now is 03:23 AM.
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.