PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
I can see a market for them as well as the plastic for the Cyclops tractors.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
#12
|
||||
|
||||
Since these old ironsides tend to live on and on, I'd bet the market for more fragile parts like the glass dash will only continue to grow.
NOW, if someone could find the tooling for the aluminum dash trims. I paid almost as much for an NOS replacement as I did for the whole dern tractor. As good a job someone did making them, I just couldn't go with the faux decal replacements. |
#13
|
|||
|
|||
im on it fellas!! let me see what i can put together, have to research which models are like..problem may be that if there is big differences between models, i will need a pattern to start..i can use an old dash and mold it without damaging it also....so bare with me...thanks..
|
#14
|
|||
|
|||
im on it fellas.. i will do some research to see how many different styles there would have to be, [molds to make] and check into some materials and costs, but reproduction dash covers in sanding/primer gel coat are not far off...keep me posted if others are interested, please..? also, i may need to use/find different styles of dash covers as patterns for molds, can do it without damage...thanks
|
#15
|
||||
|
||||
Mine needs a bit of fixing.....but not replaced, yet.
__________________
Daniel G. . (May 1970) 147 w/an IH spring assist, 48" deck, 42" blade, 1969 73, #2 trailer, 10" Brinly plow and (on loan) Dad's #2 tiller. |
#16
|
|||
|
|||
I do have a NOS dash for a 149 that I paid dearly for. I just need another one for my 109.
|
#17
|
||||
|
||||
Our 149 may need a dash also so I'm all ears here also.
__________________
102-P Narrow tires no creeper--42inch deck and IH blade. 102-D Wide tires,creeper,headlights--42inch deck and CW36 snow thrower. 1997-2086 Super with 3 point hitch and all the bells and whistles. 1961-PTE-"O", needs lots of work. 2072-Repowered with a ch18, Woods tractor. 149 with my Dad. 44" deck and QA36A. #9-70 with weights and sleeve hitch. #10-149 with a 38inch deck. 2015 Kubota BX 2670. |
#18
|
|||
|
|||
+2 for the Cyclops plastic. I have a 1641 with a broken nose.
|
#19
|
|||
|
|||
Personally, I would like a QL "blank" dash without holes. I could see a market for replacement panels for any of the plastic crap, maybe out of heavier fiberglass?
|
#20
|
|||
|
|||
i can make them as thick as you want, and definitely dont need to do the holes. would have to build a router jig to get all the cut outs right anyways.. im going to try to pull the dash off of 1250 and make a mold for it..only thing is, that the backside/underside wont be perfectly smooth, as i was going to open mold these for now..otherwise to inject or infuse them, we're talking b-molds and tens of thousands of dollars for tooling...does anyone know exactly how many "styles" there are?? thanks
|
Thread Tools | |
Display Modes | |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.