Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > Implements and Attachments

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 04-06-2016, 11:02 PM
farmall fred's Avatar
farmall fred farmall fred is offline
Senior Member
 
Join Date: Jul 2010
Location: Defiance Ohio
Posts: 390
Default Scored a sickle bar mower

I thought I would post some pictures of the 46 inch sickle bar mower I recently bought from a friend. He said he had used on his 1450 and thought it was for a White. I tried finding info on it and had no luck. Today he brought the operators manual and it shows a Simplicity GT on the cover, it is a model number 1690030 and fits many of their garden tractors. He said he attached it to his mule drive and lifted it with a chain. It shows a cable lift in the manual along with a pulley. I think I can fab a bracket to use the cable lift on my 782 beater I bought cheap and am fixing up just to run this mower. The spacing on the mount looks like it will bolt right up to my mule drive. This weekend I will see what it takes to set it up. I have been looking for a Haban for some time now and if you find one they want an arm and a leg for it. I am ashamed to say what I paid for it. Here are some pictures. It looks to be of a heavier construction than the Haban my brother has. Now I will be able to mow my road ditches that the township only does trice a year if I am lucky.
Later
Tom

Image00001.jpg

Image00002.jpg

Image00003.jpg
Reply With Quote
  #2  
Old 04-06-2016, 11:13 PM
darkminion_17's Avatar
darkminion_17 darkminion_17 is offline
Grand Member
 
Join Date: Aug 2010
Location: New Jersey
Posts: 10,996
Default

Nice score ,here is a link to the parts lookup

http://www.simplicitypartstore.com/#/s/SMP/1690030//1
__________________
Up to 530 and counting...
I give up updating my profile!
Reply With Quote
  #3  
Old 04-06-2016, 11:32 PM
Terry C's Avatar
Terry C Terry C is offline
Grand Member
 
Join Date: Nov 2014
Location: Iowa
Posts: 3,488
Default

Cool find!
__________________
Terry

O,100,72,102,123,104,124,105
125,129,149,1200,982
(2)2182s w/60in Habans
3225
Reply With Quote
  #4  
Old 04-07-2016, 07:15 AM
longislandcubs longislandcubs is offline
Senior Member
 
Join Date: Oct 2014
Location: Long Island, New York
Posts: 219
Thumbs up

Very nice pickup, good luck with it.
__________________
129, 124
Reply With Quote
  #5  
Old 04-07-2016, 09:33 AM
farmall fred's Avatar
farmall fred farmall fred is offline
Senior Member
 
Join Date: Jul 2010
Location: Defiance Ohio
Posts: 390
Default

I thought it was a good deal. When I get the 782 that I am going to put it on back together I will post some pictures of how I adapt it to a cub cadet. I have a spare two valve hydraulic control and a lift cylinder and I think I will add a cylinder to it to raise the cutter bar for transport or to angle it to cut ditch banks. I am going to see if I can get started on it tomorrow.
Later
Tom
Reply With Quote
  #6  
Old 04-07-2016, 11:18 AM
ACecil's Avatar
ACecil ACecil is offline
Grand Member
 
Join Date: Mar 2009
Location: North Carolina
Posts: 23,502
Default

Nice find! Need one here, my wife wants some high stuff mowed...lol.
__________________
Allen
Proud owner of my Original!

My Grandpa's Cart
Craftsman Lawn Sweeper
Craftsman Plug Aerator
Reply With Quote
  #7  
Old 09-15-2016, 07:28 PM
farmall fred's Avatar
farmall fred farmall fred is offline
Senior Member
 
Join Date: Jul 2010
Location: Defiance Ohio
Posts: 390
Default Finally got it finished

Well it seemed like it took forever but I finally finished installing my Simplicity sickle bar on my beater 782. Seems like every time I tried to work on it some thing else more important came up. I had a chance to use it last week and it works very well. It is much smoother running than the Haban my brother has on a his 70. The only changes I need to make are adding chains to my rear tires, and two wheel weights to the left side of the tractor to help counterbalance it on the ditch banks. Here are some pictures of it. If I evar get any spare time I would like to paint the tractor and mower, but for now it will work just fine. If anybody is interested I have a total of about $600.00 in both the 782 and the sickle bar. Enjoy
Tom

Adapted to mower lift frame,and installed jackshaft pulleys to allow for belt alignment. This still uses the standard mule drive as a regular mower deck.
IMG_20160819_104218.jpg IMG_20160819_104242.jpg
Rear mount. By removing one bolt, the lift cable and detaching belt and mule drive the sickle bar can be removed in less than five minutes. Not much harder than a regular mower deck. Only issue is you have to raise front of the tractor to slide it out.
IMG_20160819_111727.jpg
Belt adjustment on jackshaft to tighten upper belt from jackshaft to mower drive
IMG_20160819_111742.jpg
Sickle bar in chained up transport position
IMG_20160819_124448.jpg
Sickle bar in mowing position, cable lift from lift arm to bar to raise and lower cutter bar.
IMG_20160819_124606.jpg
Reply With Quote
  #8  
Old 09-15-2016, 07:44 PM
Sam Mac's Avatar
Sam Mac Sam Mac is offline
Administrator
 
Join Date: Feb 2010
Location: Galax VA
Posts: 18,753
Default

Nice setup!
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
Reply With Quote
  #9  
Old 09-15-2016, 07:49 PM
twoton twoton is offline
Grand Member
 
Join Date: Feb 2015
Location: MA
Posts: 2,532
Default

Great job! Thanks for sharing the details.
Reply With Quote
  #10  
Old 09-15-2016, 07:55 PM
farmall fred's Avatar
farmall fred farmall fred is offline
Senior Member
 
Join Date: Jul 2010
Location: Defiance Ohio
Posts: 390
Default

Quote:
Originally Posted by twoton View Post
Great job! Thanks for sharing the details.
Quote:
Originally Posted by Sam Mac View Post
Nice setup!
Thanks guys. I am pleased with how it came out. I did not want to modify the sickle bar to the point that it could not be put back on a Simplicity, Not that I will ever own one but If I decide to sell it they bring big money on our favorite auction site.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.