|
PLEASE PATRONIZE OUR SPONSORS!
|
#1
02-07-2016, 11:42 AM
|
||||
|
||||
Project 982
Well, here's the next one I drug out of the old chicken barn. A 1984 CCC built 984(982). A 984 has the rear lift and PTO but not the front ports.
DSCN2128.jpg This one is in pretty good shape with a little over 1000 hours on the meter......but the Onan is locked up.  DSCN2130.jpg DSCN2131.jpg I pulled the motor and broke out the pressure washer. She cleaned up pretty good and the original paint should buff out nice...I hope. DSCN2158.jpg Wheeled her into the shop to pull the rear and do all the normal stuff. Here is a shot of the rear pto. DSCN2174.jpg The rear looked good and the Hytran did its job. Just a little bit of gel on the bottom. This one will get Hytran put back in it. DSCN2178.jpg Check this out. The brake hub is cracked and the aluminum caliper mount is broke in half. I'm pulling the axles to replace the seals and drill the drain holes so I will see if I can weld the hub. DSCN2171.jpg DSCN2180.jpg
__________________
This ain't no hobby....it's an addiction 
|
|
#3
02-07-2016, 12:20 PM
|
||||
|
||||
|
I wonder what caused the crack in the brake disk and the caliper mount ?
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
#4
02-07-2016, 02:10 PM
|
||||
|
||||
|
me too
That's some pretty impressive damage, considering the rest of the tractor looks so nice.
You probably need to change or check those frame bolts too, That took a pretty nasty lick to break that hub like that.
__________________
Gary 1974 1650 50A "budscub" Was my fathers 1969 125 42" 1978 1450 44A dual hydraulics 1984 782 50C dual hydraulics, waiting for vanguard Z-force Cub cadet Zero turn Sears '66 Suburban 10 Sears '66 Suburban 12 2 Breaking plows, 2 disc's, front blade, rear blade, Sickle bar mower, 2 decks 3pt harrow 74 "Green 100 "John" 
|
|
#5
02-07-2016, 02:16 PM
|
||||
|
||||
|
Cool tractor! Should be a good project. Weird about the hub and braket.
__________________
http://www.onlycubcadets.net/forum/s...ad.php?t=42646  70, #1 cart. Brinly Cultivator. Some wheel weights . {125, 126, 2072-Sold~regrettably, 2284 60 inch Haban 325 deck., 451 snowblower, 2182-60 inch Haban 374 deck- "Money Pit", 401 Haban 54 inch dozer blade- rebuilt, 1440-down the road, Another 2182 for parts. Another 2284 for parts. 450 blower. 1812-sold, 2072 w/ Haban 374, and a 2182#3 w/ Haban 325}-------> All SOLD
|
|
#6
02-07-2016, 02:52 PM
|
||||
|
||||
|
Broken brake caliper? Suppose someone wrapped a chain around it/axle tube and towed it? How about the axle tube, any sign of damage like something big ran into the wheel? Don't now if they are the same but I saw a caliper for a 782/1811 on ebay a couple days ago for $10. after I spent 30 minutes getting a broken bolt out of one.
__________________
2072 w/60" Haban 982 with 3 pt and 60" Haban 1811 with ags and 50C 124 w/hydraulic lift 782 w/mounted sprayer 2284 w/54" mowing deck
|
|
#7
02-07-2016, 02:55 PM
|
||||
|
||||
|
Just a thought, do you have a dial indicator you can put on the face of the axle where the bolts are to see if it is bent? Dad had a Cub brought to him once that jumped out the back of a trailer going down the highway. This was a early 70's machine, no aluminum, it bent the axles. We swapped rears with another machine brought in the week before with a blown engine.
__________________
2072 w/60" Haban 982 with 3 pt and 60" Haban 1811 with ags and 50C 124 w/hydraulic lift 782 w/mounted sprayer 2284 w/54" mowing deck
|
|
#8
02-07-2016, 03:05 PM
|
||||
|
||||
|
Nice tractor. What engine are you putting in it?
__________________
1572, 1864 x2, 1810 x2, 1863 & GT1554(Dad's Ole Mowers), 1811,782D, 1872 x2, 782DT(Sold), 3235, 1860, 1772 with 3-point and Turbo.
|
|
#9
02-07-2016, 03:46 PM
|
||||
|
||||
|
Very Nice Oak!! Keep us posted!
I'd like to have a 982 in my collection if you ever happen to run across one down this way.. Seems our northern friends keep them all hoarded up! 
__________________
Jay 40 years of Using and playing with IH Cub Cadets! Proud owner of the following: Cub Farmall, Super A Farmall, Original, (2)70's, 72, 100, 102, 123, 105, 125, 127, 108, 128, 1450, (3)782's, Yellow 982, 1782, "Sam's" 2182, M Farmall and a #7 trailer
|
|
#10
02-08-2016, 12:08 AM
|
||||
|
||||
|
Good start there Todd
I like your way of cleaning the bottom, just flip er' over on the side...
__________________
Make the best of each day , Todd  Original's Face Lift thread.http://www.onlycubcadets.net/forum/s...ad.php?t=34439 (O) Start to Finish video.https://www.youtube.com/watch?v=GAoUNNiLwKs Wheel Around videohttps://www.youtube.com/watch?v=XUL-m6Bramk They can't all be turn key! 
|
 |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
