Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Off Topic > General Talk

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 05-06-2018, 07:20 AM
jzidle jzidle is offline
Member
 
Join Date: Jul 2017
Location: Maine
Posts: 45
Default Boat wiring

I’m betting that the smart people on here can help me. I have a 1992 Century Resorter with a GM 350. For the first time ever, it’s sputtering and stalling and needs to be revved up to keep running. It was in for a new prop, driveshaft, and cutlass. It’s an inboard. One of the cutlass bolts has a ground fitting on it and i found a green wire near it that I believe was grounded there. I’ve since found another green wire that might need to be in that fitting as well, but I’m just not sure if it does. Interestingly, with nothing running or turned on, when I put the blower on, it only runs weakly and the oil pressure guage rises gradually. This feels like a missing ground? Would that make the engine run very badly? It was left out in the rain by the prop shop so there could also be a bad gas situation. I’m unable to find a wiring diagram and the wiring’s horrible to get to.
Do you all have any ideas?
Thanks,
Joe
Reply With Quote
  #2  
Old 05-06-2018, 07:55 AM
R Bedell R Bedell is offline
Administrator
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

Generally Speaking...............The green wire sounds like it's a grounding connection.

You could confirm but taking a DVM (or VOM) meter and measuring the resistance between the ends of the green wires to the Battery negative (-) terminal. If you have zero (or near zero) ohms resistance, the most likely it is a ground wire.
__________________
Roland Bedell

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

Buy: Made in the USA
Reply With Quote
  #3  
Old 05-06-2018, 08:14 AM
jzidle jzidle is offline
Member
 
Join Date: Jul 2017
Location: Maine
Posts: 45
Default

I think you’re right. Its general location in the bilge supports that answer. Do you think this could cause the engine to run poorly?
Reply With Quote
  #4  
Old 05-06-2018, 08:18 AM
ol'George's Avatar
ol'George ol'George is offline
Grand Member
 
Join Date: Oct 2009
Location: MI
Posts: 6,625
Default

It takes positive as well as negative to complete circuits, a ground,while it gets no respect, is just as important as the positive, and more so, if it is a lightning rod!!
Reply With Quote
  #5  
Old 05-06-2018, 08:47 AM
R Bedell R Bedell is offline
Administrator
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

The "poor functioning" of some components can mean it is seeking a grounding path, and "back feeding" through other devices. Continued use like this will result in some device(s) burning out.

It would be wise to trace this problem(s) down and fix them.
__________________
Roland Bedell

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

Buy: Made in the USA
Reply With Quote
  #6  
Old 05-06-2018, 09:13 AM
ol'George's Avatar
ol'George ol'George is offline
Grand Member
 
Join Date: Oct 2009
Location: MI
Posts: 6,625
Default

Your small block 350 being a '92, will have electronic ign. and possibly fool injection.
If a ground is missing somewhere, like Roland stated, you can back feed and or overload other components besides the engines electronics.
It would be prudent that after you get the ground re attached, do check all your electronic/electrical systems
( communication, fish finders etc.) for proper operation before you venture out on the water.
Hope it is simply the wire.
I've seen some seemingly unrelated components damaged.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:26 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.