Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Folks we have a new owner!
Greg Rozar AKA- CubDieselFan


Go Back   Only Cub Cadets > Cub Cadets > Implements and Attachments

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 08-24-2015, 02:00 PM
Rbbbarrett's Avatar
Rbbbarrett Rbbbarrett is offline
New Member
 
Join Date: Jul 2014
Location: Ohio
Posts: 20
Default Q36 gear box

I decide to paint the snow blower for winter and disassembled the mount from the blower. After the paint job was complete on the mount that held the right angle gear box it was tilted while drying and a light brown and very thick fluid oozed out from the shaft seals. So I tried the 80/90 lube with a conditioner to help with the seals and it just ran out. I wondering after reading some posts about using chassis grease if snow mobile grease would work for the colder temperatures or just stick with a general wheel bearing grease high temperature grease to be safe. I know this is not what the manufacturer recommends and I don't want to get into the changing of seals just to have them leak after using it for 2 or 3 months a year. Just a thought......
Reply With Quote
  #2  
Old 08-24-2015, 02:31 PM
64fleetside 64fleetside is offline
Senior Member
 
Join Date: Sep 2014
Location: Arkansas
Posts: 745
Default

I used 00 weight grease available at
NAPA
Reply With Quote
  #3  
Old 08-24-2015, 02:37 PM
R Bedell R Bedell is offline
Administrator
 
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default

Some people use a "cocktail"......50% grease and 50% 80/90W Oil.
__________________
Roland Bedell

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

Buy: Made in the USA
Reply With Quote
  #4  
Old 08-24-2015, 03:08 PM
Rbbbarrett's Avatar
Rbbbarrett Rbbbarrett is offline
New Member
 
Join Date: Jul 2014
Location: Ohio
Posts: 20
Default

Thanks for the input. I had to google the 00 spindle grease and a local tractor supply has it in stock. Will give it a shot and if any problems will try the 50/50 method before packing it full with bearing grease. Thanks.......Rob
Reply With Quote
  #5  
Old 08-24-2015, 07:16 PM
Yosemite Sam Yosemite Sam is offline
Grand Member
 
Join Date: Mar 2009
Location: Medora, IL
Posts: 3,866
Default

To the best of my knowledge there are only two gear boxes for the snow thrower.

The newer one has a has a thin open bearing inside, then a seal in the middle and an outer sealed bearing. Any of this style that I have ever seen has 4 mounting bolts and a tin cover.

The older style has two sealed bearings (exact same bearing as on the outer of the above box) and no seal between the bearings. Any of this style that I have ever seen has 3 mounting bolts and an aluminum cover.

That said, it is my opinion that if the "seals" are leaking, the bearings are worn enough to let the seals leak, or the seals in the bearing have been disturbed in some way.

FWIW, some guy on ebay has bearing and seal "kits" for a reasonable price. He also has roller chain, needle bearings and some other hard to find stuff.
__________________
More IH Cub Cadet Parts RIGHT HERE
Reply With Quote
  #6  
Old 08-24-2015, 08:43 PM
Rbbbarrett's Avatar
Rbbbarrett Rbbbarrett is offline
New Member
 
Join Date: Jul 2014
Location: Ohio
Posts: 20
Default Gear box

The mount is three bolts with a cast iron cover that has a drain hole. I checked the link and 52 $ is a good price. The leak is fixed for now, the "00" spindle grease did the trick. I will probably buy the kit And overhaul it next spring, thanks again for the info
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:42 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.