|
PLEASE PATRONIZE OUR SPONSORS!
|
#11
02-09-2015, 11:55 PM
|
||||
|
||||
Frame has the holes. These are the same threaded holes you would use to bolt on your snowblower. Obviously the bumper comes off when the blower is on but can stay on with the deck and mule
__________________
1641 with a 451 blower "Ramapo" 1782 soon with 3pt and rear PTO "Sam" 2082 with blowed up engine "Buffalo" 2182 with a 60" White "McCoy" 2182 with a 60" Yellow "Indiana" B2920 Kubota w/ 60" belly, FEL, Back Hoe "George" 
|
|
#12
02-10-2015, 03:01 PM
|
||||
|
||||
|
have the tubes bent up need to go to town to grab some flatstock to make brackets with. got 2 inches of snow so thats it for today i get a little seat time
__________________
982D kwik-way loader w/3 spool control and front and rear remotes,2182, 1812 cat 0, 1440 puller, 3185 grass killer, 2x 450s, QA42, 364, tiller
|
|
#13
02-10-2015, 05:19 PM
|
||||
|
||||
|
Looks great! Don't forget show 'n tell when you're done!
I was thinking of making one this spring. My '95 CC 1641 has the standard bumper but, I think a carry-all of some sort is needed. Hey! Grandsons need their chow while drivin' 'round the property! I'm thinking large enough for a cooler for the little guys and me too! PS. Just removed my bumper for a repaint 'n clean up. Cleaned and painted the yellow frame part also. The 1/2-13 bolts did threaded into PEM nuts (pressed in). Cleaned the threads with a tap, new bolts and lock washers, always Never-Seez on the threads during reassembly.
__________________
Tankman '95 CCC 1641 Eastern PA USMC
|
|
#14
02-16-2015, 02:38 PM
|
|||
|
|||
|
Any updates? I don't own a bender so Ill have to go to the muffler shop and get them to bend my stock and I can weld it up myself. Looking forward to your final results.
__________________
1994 Cub Cadet 1864 1997 Cub Cadet 2165
|
|
#15
02-16-2015, 02:42 PM
|
||||
|
||||
|
been cold here and dont wanna heat up the garage and i still need to pick up some flat stock for the mounts
__________________
982D kwik-way loader w/3 spool control and front and rear remotes,2182, 1812 cat 0, 1440 puller, 3185 grass killer, 2x 450s, QA42, 364, tiller
|
|
#16
02-17-2015, 06:52 PM
|
||||
|
||||
|
Looks good so far. I can't wait to see the finished product. Someone needs to start making and selling more of these bumpers to help protect these plastic front ends. I could use one for my 2182.
__________________
Original- Wheel Weights, AG tires, Brinly Sleeve Hitch, #2 Cart 882- 50c Mower Deck 2182- 60c Mower Deck, Rear PTO, Cat 0 3-Point, Brinly 60" rear blade Case 646 FEL Case 446
|
|
#17
02-17-2015, 08:55 PM
|
||||
|
||||
|
let me get this one finished ... wonder what people would pay for one
__________________
982D kwik-way loader w/3 spool control and front and rear remotes,2182, 1812 cat 0, 1440 puller, 3185 grass killer, 2x 450s, QA42, 364, tiller
|
|
#18
02-18-2015, 12:34 AM
|
||||
|
||||
|
Quote:
__________________
Current: 86 102 122 1810 1862 1864 SZ60 Past: Original 71 72 73 100 102 122 123 124 125 127 129 147 149 169 383 582 682 782 782D 784 982 1000 1050 1100 1200 1210 1250 1415 1420 1440 1450 1535 1641 1650 1710 1711 1730 1806 1810 1811 1860 1861 1862 1864 1882 3185 3205 7265
|
|
#19
02-18-2015, 12:52 AM
|
||||
|
||||
|
__________________
Current: 86 102 122 1810 1862 1864 SZ60 Past: Original 71 72 73 100 102 122 123 124 125 127 129 147 149 169 383 582 682 782 782D 784 982 1000 1050 1100 1200 1210 1250 1415 1420 1440 1450 1535 1641 1650 1710 1711 1730 1806 1810 1811 1860 1861 1862 1864 1882 3185 3205 7265
|
|
#20
02-18-2015, 07:17 AM
|
||||
|
||||
|
Yes Extreme does sell a bumper, I could be wrong but from what I can tell it can only be used if you have your mule drive taken off, so It cannot be used while mowing and that's the most important time to have a front "bumper" in my opinion. Extreme's setup is a great looking weight bracket and I like it but does not serve as a bumper when needed most.
__________________
Original- Wheel Weights, AG tires, Brinly Sleeve Hitch, #2 Cart 882- 50c Mower Deck 2182- 60c Mower Deck, Rear PTO, Cat 0 3-Point, Brinly 60" rear blade Case 646 FEL Case 446
|
 |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
