PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
H-42 drive pulley
Sorry guys, I know I read a little bit about replacing the drive pulley for a H-42 but can't seem to find when I search.
The problem is the bore of the pulley is worn out, partstree says no longer available, seems like I saw where someone bored it out and welded in an insert but I can't find that either. I found a machinist that said he would bore it out but that I should be able to find an insert ready to go in, locally I haven't been able to yet. Found a "forged" 2 pc pulley, bore insert is separate to accommodate different sizes of bore, at grainger but about $70.00! ouch! And I guess I'm not sure that forged pulley would hold up in this situation, these things aren't exactly what I would call a smooth running machine. Anyway, any help would be appreciated as always, even just the right threads to read. Pic below, o.d. is just under 6", maybe 5 15/16"? 1" bore for a 5/8" belt. Thanks! Vic |
#2
|
||||
|
||||
I can fix that pulley. I'll bore the pulley out and recut the keyway. I'll make a slotted sleeve and a custom keyway.
This is a tiller pulley I repaired. It will cost $50 plus shipping so if you can find another pulley to use, that's OK too. |
#3
|
||||
|
||||
Thanks Jeff, sent an email.
Vic |
#4
|
||||
|
||||
This may be an option for you.
Pulley http://www.tractorsupply.com/en/stor...s?cm_vc=-10005 Hub http://www.tractorsupply.com/en/stor...re?cm_vc=IOPDP These are a weld together setup. Just get the proper pulley and hub size then weld them together. Not trying to cut Jeff out of a job.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
#5
|
||||
|
||||
Quote:
|
#6
|
||||
|
||||
Sam, you know I saw that pulley in the store and asked how they worked, they didn't have a clue, said it would need to bolt up to something. Guess I didn't get the right guy, kind of frustrating. I also looked on line but guess I didn't search for the right thing.
Is there any info on how they fit up and weld? suppose it might be obvious once I get the 2 parts in my hand. Thanks, Jeff, I want to look at them again, and I really appreciate your offer to help, I'll let you know which way I go. Thanks, Vic |
#7
|
||||
|
||||
Quote:
Just let me know what you decide |
#8
|
||||
|
||||
Quote:
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
#9
|
|||
|
|||
I've used those weld in hub pulleys plenty of times. They work just like any pulley would. Like Sam said, pretty simple.
|
#10
|
||||
|
||||
Thanks guys, I am going to tsc tomorrow to check it out, good to know about the offset, I might not have thought about alignment till it was too late, Thanks Sam!
Jeff, I'll be in touch and I'll always keep you in mind for these hard to find parts. The drive shaft worked awesome and the price couldn't have been lower or you would have to give it away. Thanks Vic |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.