|
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
#1
12-25-2012, 08:03 PM
|
||||
|
||||
Aluminum billet cover from Kirk engine ?
Got the Bosch coil, pretty yellow coil wire & point saver for my #109. So far have read nothing but good comments about these. Soooooooooo,
I was wondering about the billet cover they offer? Does it really do the job described?  Do you have one installed & if you do have you noticed a difference in what it supposed to do? Besides being pretty pink! Thanks in advance, NIK,
__________________
It dont cut grass, but its yellow. 
|
|
#2
12-25-2012, 09:03 PM
|
||||
|
||||
|
Quote:
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL
|
|
#3
12-26-2012, 08:46 AM
|
||||
|
||||
|
Whats a lighter wallet worth if it does this as claimed? I like this concept if it works? DUNNNO?
Breather cover allows remote routing of breather gasses, keeping exterior of engine clean. Unrestricted passage lets engine breathe more freely, keeping oil cleaner. Fuel pump cover matches breather cover perfectly, for that detailed, quality look. Nik,
__________________
It dont cut grass, but its yellow.
|
|
#4
12-26-2012, 09:00 AM
|
|||
|
|||
|
Knowing David Kirk for a while now, it will do what he says, and he has quality parts.
You have to decide if the value is there, for you.
__________________
Roland Bedell CC Models: 100, 105, 1450, 782, (2) 784, & 2072 Buy: Made in the USA 
|
|
#5
12-26-2012, 09:41 AM
|
||||
|
||||
|
I have been wanting to get one for my 128, simply for the reason stated. It will help keep oil vapor and gunk from building up on the block.
__________________
DWayne 1973: 128, ag tires, 3pt. lift, spring assist, lights, 42" Deck 10" moldboard plow 2016 XT1 42" deck 18HP
|
|
#6
12-27-2012, 06:18 PM
|
||||
|
||||
|
You mean to tell me out of the millions & millions (
) of people on this site no-one has a billet cover from Kirk ??????????????????????????????????????????????????  Geeeeesh? Nik,
__________________
It dont cut grass, but its yellow.
|
|
#7
12-27-2012, 08:44 PM
|
||||
|
||||
|
I've got aluminum covers that I made on my pullers that gave David the idea to make them. I left mine brushed aluminum. they would be fairly easy to polish out if you wanted. they aren't that hard to make.
|
|
#8
12-28-2012, 09:08 AM
|
||||
|
||||
|
Quote:
Now ya got me wondering??????? Seems like a no brainier. Just wondering on the thickness of the aluminum? Huh? Huh? Any tips or clues? NIK,
__________________
It dont cut grass, but its yellow.
|
|
#9
12-28-2012, 01:35 PM
|
||||
|
||||
|
the ones I made were out of 1/4 in. , I think Kirk use's a 1/8 pipe elbow . I used 1/4 in pipe. , and also used a 3/8 id hose. I had heard that in the winter the smaller breather hose they used would ice up and start to freeze shut. you don't want that to happen or your oil seals will start to leak or another area such as a pan gasket, bearing plate gasket or what ever the path of least resistance is. I made mine around 15 years ago.
|
|
#10
12-28-2012, 08:18 PM
|
|||
|
|||
|
Cover
Nikster- I am with dvogtvpe on this one. All pullers use them, a little different reason but same principle. I have a billet aluminum one with the IH logo machined into it that I would part with, I can get a picture of and send if your interested. PM me if interested.
|
|
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.
Linear Mode
