PLEASE PATRONIZE OUR SPONSORS!
#1
|
|||
|
|||
IH tiller
The local CC parts collector offered an IH tiller for $350 complete w/gearbox. I'm not a collector, I wanna use it. How well do these work? I am mostly concerned about that long belt under the tractor coming off or getting stuff stuck in it and tossing the belt.
I had intended on buying a front tine tiller and converting it for use on the rear of the tractor. Would be cheaper and have its own engine, but that has it's drawbacks also. |
#2
|
||||
|
||||
I had a tiller on a 1250 with both extensions for a short period (stupid me for getting rid of it, but that's another story ) and absolutely LOVED it. I never once had the belt come off the pulleys, which seems to worry a lot of people. I was able to set it to its lowest setting and go to town. The only exception was rough ground with large sections of concrete (unbeknownst to me) in it. I started shallow then with each successive pass went a little deeper. If you're worried about toughness, I'll say this; that tiller ate up 3x3 sections of buried concrete and came out the other side asking for more. They really are well built pieces of IH history. I'd recommend getting one, I know I would if I had a chance
__________________
-Ryan
|
#3
|
|||
|
|||
Well, guess I need to rat-hole some cash then...sounds like they are pretty good.
This fella also sed they worked great, he had one mounted on the back of a 128. I'll need another tractor to mount this on, right? lol |
#4
|
|||
|
|||
Get the mule drive with it. I am finding out there are differences between the tiller mule drive and the mower mule drive.
I bought a basket case 1450 with a #2 tiller January this year. It didn't come with the mule drive. The PO tried to modify the bracket for use with the mower mule drive. It didn't work. The mule drives for 44" decks have an angle to the pulleys to accommodate the offset center pulley of the deck. The angle will eventually shred your expensive long belt. The pulleys are heavier on the tiller mule drive too. Mower pulleys are stamped and tiller pulleys are solid steel. Check it out: http://www.onlycubcadets.net/forum/s...+drive+pulleys Mule drive thread: http://www.onlycubcadets.net/forum/s...ad.php?t=31284 I picked up a mule drive for a later tractor that has straight pulleys. My plan is to rework it for my tiller. HTH Bob |
#5
|
||||
|
||||
Also make sure the right angle box comes with it.
__________________
2 Originals, 100, 105, 125, 1450, 1200, 2 IH 982's, 1211, 2072, 2-1864's, 1782, 3 - 42" front blades, 3 Haban 54" blades, Haban sickle mower, BB36, QA-36A, 42" IH rear blade, 42" IH landscape rake, #1 tiller, #40 box blade, 59M shredder, #2 cart, International 3312 push mower, International 250 power washer, 1952 IH refridgerator, 1971 IH 1210 3/4T 4x4 truck |
#6
|
||||
|
||||
You will also need the rear lift to raise and lower it. If you do NOT have hydraulic or electric lift, a helper spring is a must.
I have a tiller with one extension that I use behind my 125. It works great. I put my next door neighbors garden in the other year and used it to cut right thru the lawn. |
#7
|
||||
|
||||
How does it work? short answer- You hook it up, drop it in the dirt running, and it throws it everywhere.
__________________
Daniel G. . (May 1970) 147 w/an IH spring assist, 48" deck, 42" blade, 1969 73, #2 trailer, 10" Brinly plow and (on loan) Dad's #2 tiller. |
#8
|
||||
|
||||
I use a no. 2 tiller behind a 782 and it's awesome. Highly recommend getting one. The belt was around $100 from the dealer, got one for $30 from vbelts4less.com. I'd scarf it up if price is right. Put some hours on mine and never had any belt issues, even in really hard ground
__________________
-Rick IH 782 IH 126 CCC 1863 |
#9
|
|||
|
|||
I have 3 tillers, two of them on gear drives (100 and 128) and one on a hydro (129) they are fantastic and I love them.
I do like the using them on the gear drives better than the hydro though.
__________________
More IH Cub Cadet Parts RIGHT HERE |
#10
|
||||
|
||||
Be sure to get the belt guide that bolts to the tranny.
__________________
Up to 530 and counting... I give up updating my profile! |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.