PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
First Mow
I dug out my 50C Mower Deck for the season. I had some issues with it over the years and this past week, was the time to address them. I had a hole in the leading edge of the deck that needed to be patched. It was the size of about a golf ball. Got that taken care of. Next, I have always hated the way that IH placed the Deck Idler, in that the 11/16" nut, on the under side of the deck, always caught grass and created a build up. Well, that got moved. Relocated it to where this nut is now behind the shroud and out of the way. Next, the hex head bolts that hold down the "belt cover", that also was in the "discharge stream", got removed. I plugged all the holes with J/B weld. Have a new way of securing this cover. Now, there is no obstacles in the "discharge" area of the deck underside, we will see how the grass collects this season. The usual maintenance, grease. New 6" (non IH) rear gauge wheels with roller bearings makes her ride smooth. Now, a new set of Gators, and she cuts like a champ for the first mow of the season.
Working on a design for Front Castors. I will be developing that over the next few weeks.
__________________
Roland Bedell CC Models: 100, 105, 1450, 782, (2) 784, & 2072 Buy: Made in the USA |
#2
|
||||
|
||||
Just because you're the boss doesn't allow you to get away with no pics.
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
#3
|
|||
|
|||
Yeah, I'll see if I can get some this afternoon in my next mowing session.
__________________
Roland Bedell CC Models: 100, 105, 1450, 782, (2) 784, & 2072 Buy: Made in the USA |
#4
|
||||
|
||||
Sams right
I think 50c should have front casters too. I'll be waiting for your design
__________________
Terry O,100,72,102,123,104,124,105 125,129,149,1200,982 (2)2182s w/60in Habans 3225 |
#5
|
||||
|
||||
x2..............
__________________
1572, 1864 x2, 1810 x2, 1863 & GT1554(Dad's Ole Mowers), 1811,782D, 1872 x2, 782DT(Sold), 3235, 1860, 1772 with 3-point and Turbo. |
#6
|
||||
|
||||
Yeah come on Roland, where's the pics?? Lol just your first mow? I've mowed 4 times now! Sounds like some good fixes! Happy to hear that someone besides me uses jb weld!
__________________
Brian April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake! |
#7
|
||||
|
||||
We think alike, several years ago I removed the belt cover bolts and welded studs to the top side of the deck making them studs.
Then the idler pivot got a countersunk allen and the spring anchor bole got the stud treatment like the cover bolts. So, like yours, there is no obstacles under there to catch/impede the discharge of grass. It works well, but the grass still sticks to the underside, but it is a lot easier to scrape off. |
#8
|
||||
|
||||
So, is this a really bad problem with the 50C decks or are you guys just doing some fine tuning? Reason I ask is I have a 50 C that needs to be refurbished form my 1811.
__________________
2072 w/60" Haban 982 with 3 pt and 60" Haban 1811 with ags and 50C 124 w/hydraulic lift 782 w/mounted sprayer 2284 w/54" mowing deck |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.