PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Gas cap question
So here's a brain teaser for you, how is it that everytime I go to mow with the 1211 the gas cap reads empty but by the time I'm done mowing it reads correctly? It's a new cap and the float moves freely and I'm not sure why it sinks just sitting but is fine after I run the tractor a while, even if I take it out and move the float manually and put it back in it still reads empty for the first 15 minutes of mowing.
__________________
Tim Pap's 100 Restored 108 1211 Dual Stick 1050 Pap's 100 restoration thread - http://onlycubcadets.net/forum/showthread.php?t=47965 |
#2
|
||||
|
||||
I just assumed that the PO put on gas gauge/ cap on that is too short so it would read empty even with a half talk. Didn't think about the float sinking when it sat, I've never thought to check it after mowing because it's under the hood on my 1450. Hmmmm
Bill |
#3
|
||||
|
||||
Maybe the indicator is spinning around inside of the plastic dome.hehe
__________________
Up to 530 and counting... I give up updating my profile! |
#4
|
||||
|
||||
Would be interesting to see if it did the same in ethanol free gasoline, perhaps that has something to do with it. It might also be something about the pressure in the tank. The new style gas caps use a pressed styrofoam and the old ones used cork.
Cub Cadet 123
__________________
Still don't know what I'm doing in OHIO?.....If you find me, then please point me back toward INDIANA. |
#5
|
||||
|
||||
I replaced the cap on my 1200 with one from orscehlens. No gauge leaks a little if you fill it to full, but that's what you get for about $5.
__________________
Brian April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake! |
#6
|
||||
|
||||
I have a cap/gauge like you mention and the float does not float.
It is a plastic looking float, but when you put it in a container of gasoline it slowly sinks to the bottom, guess that makes it a non float?? Weird deal, so I just replaced it with one of those ebay gauges. It don't appear to be saturated with fuel, and is not hollow or anything. Who knows.--- |
#7
|
||||
|
||||
Here's a pic after its sat over night, like I said before if I start mowing it will read accurately after about 15 minutes. Just plain weird.
__________________
Tim Pap's 100 Restored 108 1211 Dual Stick 1050 Pap's 100 restoration thread - http://onlycubcadets.net/forum/showthread.php?t=47965 |
#8
|
||||
|
||||
It sucks the gauge doesn't work. May just have to fill and mow an check it with a paint stick or something. I do that with the 1200.
__________________
Brian April 1979 1200 Quietline 44A deck 1988 1211 customized into a 1288 with a K301AQS 38C deck and a 1864 54” deck . Snow blades 42" and 54" . Brinly disk, brinly plow a cultivator and a $5 brinly yard rake! |
#9
|
||||
|
||||
The gauge works while the tractors running but I'm not sure why, no big deal but was just curious if anybody had a good explanation.
__________________
Tim Pap's 100 Restored 108 1211 Dual Stick 1050 Pap's 100 restoration thread - http://onlycubcadets.net/forum/showthread.php?t=47965 |
#10
|
||||
|
||||
That is weird for sure. On a similar note, the gauge on my 782 doesn't work. However, when I submerge the gauge in a 5 gal bucket of water it will read. Soon as it goes back in the gas tank- nothing, stays on empty. Float looks like new. Not an issue for me as I only put probably 30 hrs or so a yr on it
__________________
-Rick IH 782 IH 126 CCC 1863 |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.