PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Mechanic In A Bottle...
I know this is a lazy way out, but I bought about 4 straight shaft weed whackers for $4 each, 1 has major issues, 1 needs a replacement primer bulb before I can even start looking at it, but the other two were intact enough for me to spend 5 minutes each with them. I bought my first bottle of mechanic in a bottle, added it to the fuel and they both fired up and ran (and continue to run) just fine and smooth! Put a little in my 982 and it has never started faster than what it did then and continues to start and run just fine. Keep in mind, I used it once and that is all that I needed and never in large quantities (I think my last word has a wordy dird hidden in it!!!).
I'm not trying to put anyone out of work or say that this is the fix all or should replace turning some wrenches, but I wondered if anyone else had used it or had any success with it. Cub Cadet 123
__________________
Still don't know what I'm doing in OHIO?.....If you find me, then please point me back toward INDIANA. |
#2
|
||||
|
||||
Is that the stuff being sold by VP fuels?
__________________
Tim Pap's 100 Restored 108 1211 Dual Stick 1050 Pap's 100 restoration thread - http://onlycubcadets.net/forum/showthread.php?t=47965 |
#3
|
||||
|
||||
I think so Tim, but I am not 100% sure......
Cub Cadet 123
__________________
Still don't know what I'm doing in OHIO?.....If you find me, then please point me back toward INDIANA. |
#4
|
||||
|
||||
I keep SeaFoam on hand to put in stuff that has been sitting up a while and the fuel system is now a bit gunky. It works well, we just don't use it often. I may pick up a bottle of this to have on hand as well. I think as long as you have a mechanically sound piece of machinery that has just been sitting a long time, it would probably help clear any residue/oxidation in the fuel system. With all fuel additives, after one dose and using the machine if you still have issues, you probably need to get a gasket kit---you're going to need it.
__________________
2072 w/60" Haban 982 with 3 pt and 60" Haban 1811 with ags and 50C 124 w/hydraulic lift 782 w/mounted sprayer 2284 w/54" mowing deck |
#5
|
||||
|
||||
__________________
2264 with 54 GT deck 1641 AKA Black Jack with a 402-E Haban Sickle bar mower JD317 dump truck BX2670 with FEL |
#6
|
|||
|
|||
I know of a few mechanics that always seem to have a bottle, nearby at least!
|
#7
|
||||
|
||||
I would shy away from mechanics that come in a bottle.
__________________
Up to 530 and counting... I give up updating my profile! |
#8
|
||||
|
||||
Since my youth, I thought we can only found genie in a lamp, no one ever tell me we can find mechanic in a bottle! I feel betrayed!
__________________
Gilles. 1988 2072 401 54" hyd angled blade 1988 1872 364 snowblower/C50 deck 1976 1650/QA42A blower/44A deck/standby 1976 1450TS/Sleeve hitch/44A deck/in storage 1963 100 (red)/in storage 2010 Kubota 2380-2/42" infinity deck (engine swap) |
#9
|
||||
|
||||
Do you get 3 wishes?
__________________
1572, 1864 x2, 1810 x2, 1863 & GT1554(Dad's Ole Mowers), 1811,782D, 1872 x2, 782DT(Sold), 3235, 1860, 1772 with 3-point and Turbo. |
#10
|
||||
|
||||
Never found one of those lamp but I get many things I never wish for...
__________________
Gilles. 1988 2072 401 54" hyd angled blade 1988 1872 364 snowblower/C50 deck 1976 1650/QA42A blower/44A deck/standby 1976 1450TS/Sleeve hitch/44A deck/in storage 1963 100 (red)/in storage 2010 Kubota 2380-2/42" infinity deck (engine swap) |
Thread Tools | |
Display Modes | |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.