Quote:
Originally Posted by Randy Littrell
Taylorjim, I plan to do 3/4 to a manifold with 3/4 to the hot water heater. 1/2 out to everything else.
One of the big reasons for the tankless and direct vent is to gain some room where the hot water heater is and eliminate the flue pipe running through a bedroom I built in the basement. We are going to add a half bathroom in the room that houses the heat/ac and hot water heater. I live in a old small house.
But, I do want to make sure I do everything right.
Randy
|
Yup, we did the same thing. We had an attic converted to a bedroom and it had the old metal flue pipe from the furnace and hot water tank. Furnace was replace and vented out pvc, so went with a 50gal power vent tank water heater and vented that out through the side of the house to eliminate the flue vent.