View Single Post
  #11  
Old 10-12-2017, 08:51 AM
Vrobert's Avatar
Vrobert Vrobert is offline
Senior Member
 
Join Date: Sep 2017
Location: MD
Posts: 274
Default

Quote:
Originally Posted by RLause View Post
Gorilla duct tape on the seat. Clean it good first with alcohol and the tape will stick better.
Now I really know I'm among friends here!

I pulled the front tins off and no critters to be seen. I'm a little worried about the side tins that bolt to the head. The first bolt I tried is seized I think. I may just pressure wash around them and spray some penetrating fluid in case they have to come off later.

I ordered a fuel pump and a carb kit. Once it's running smooth I'll put the seat on it and try to get it to move under it's own power. The hydro fluid is so clean I don't plan to change it. I think both fluids were changed when the PO parked it.

The trans has very little resistance so I have been rolling it around by hand. Is that going to damage the hydrostat? Do I need dollies to move it around?

I found the wiring schematic difficult to understand at first. Some of the switches aren't labelled and the details are vague. I'll modify the schematic and post it here.

Rob
Reply With Quote