View Single Post
  #9  
Old 02-21-2010, 03:37 PM
murphycc
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by cub149 View Post
Not sure what you meant by that Scott, but I don't take anything that way. I am looking to learn and I can take whatever you through at me. If I don't like it I will let you know. I may not always understand but all I ask is be patient. If I am doing something that is a waist of time, then tell me. Don't let me waist my time, it's precious these days. If it isn't the problem then tell me.
Did you see my other post about the points plunger sticking? If not you should look at it also, see my other post on Onan and you will find it.

You and Ol'George have given me some good starting points and I will get to it now that I have somewhere to start. Thanks and I will post what I find in a few days.

Nothing, absolutely nothing. I have a history of arguing.


Plunger? Rod that pushes the points and rides the cam? Remove it and stick one end in a drill and spin it while using some 800 grit wet-n-dry paper in the other hand and cleanit up, then chuck the other end and clean it up. Try to get a polished finish, see if that helps.



Scott
Reply With Quote