I pulled the complete axle out and need to clean the rust off of the axle so I can remove the bearings.
DSCN1288.jpg
I used a 3M Scotch Pad on it and cleaned it up and the bearings slide off. It looks like the seal came loose in the bearing block. I need to see if I can find new seals and reuse the bearings. Cub wants around $50 for each one and there are 4 total. The arrows point toward the differential. The left bearing is what I call a babbitt bearing and the right one is a roller bearing....that is not in any oil and doesn't have a grease fitting.
What were they thinking!
DSCN1291.jpg
Here is the "babbitt bearing", it is the one near the differential. It has a seal around the axle on the outer side and a seal around the block on the side towards the differential(side shown). The two make a complete seal to the axle tube.
DSCN1293.jpg
And here is the roller bearing, it is near the hub and has seals on both sides.
DSCN1294.jpg
Okay guys. I need to find seals for this thing. Can anybody tell me what seal this is? It looks like it was made by KTP and the number is 4885.
DSCN1297.jpg
Thats all for tonight. Stay tuned for tomorrow knights episode.