Okay, I'm back. I called around on the oil seals and found that Motion Industries had them in stock but not the ones I posted, those are NLA but they had another brand so I ordered them. I purchased 6 seals for a total of $48 shipped to my door. I pulled all the old seals and cleaned everything up.
DSCN1304.jpg
The roller bearings looked okay for not having any grease in them. What was in there was all dried up and nasty so I cleaned them with degreaser and brake cleaner then repacked them with wheel bearing grease after the seals were installed.
DSCN1305.jpg
The roller bearings are HK 3020 if you ever need to replace them. I pressed one of them out just to see how hard it was and they come out pretty easy.
Here is a shot of the new seals installed with the roller bearing block nearest.
DSCN1314.jpg
Time to button it up. The only place I used Permatex was at the top and bottom of the inner bearing block. I used Ultra Black.
DSCN1320.jpg