View Single Post
  #3  
Old 05-15-2018, 11:05 PM
J-Mech J-Mech is offline
Banned
 
Join Date: Apr 2013
Location: Oblong, Illinois
Posts: 17,594
Default

Sounds to me like you didn't tighten the flywheel nut/bolt, or retorque the head after run in. Better read the manual this time around.

I put anti-seize on the crank for the flywheel. Never had a one come loose.

None of the ACR tabs were "adjustable". Some are harder than others. Don't bet the cam you are getting can be "adjusted".
Reply With Quote