Quote:
Originally Posted by Vrobert
I pulled the front tins off and no critters to be seen. I'm a little worried about the side tins that bolt to the head. The first bolt I tried is seized I think. I may just pressure wash around them and spray some penetrating fluid in case they have to come off later.
The trans has very little resistance so I have been rolling it around by hand. Is that going to damage the hydrostat?Rob
|
The front isn't where the "critters" and dirt and oil hang out. It's in and around the flywheel, and plugged in the head fins.
PB the bolts now and let it sit. Then do your pressure washing to remove the excess penetrant.
You ain't going to hurt anything "rolling" the tractor around, it's the pulling it around the yard that's hard on them.
And or do what Tim said. But you should get those tins off and take a look around. But as the old saying go, "it's your tractor", do as you wish...