While I was at it I figured I’d do the frame rail mod;
http://www.onlycubcadets.net/forum/s...03&postcount=1
On the 1450 it turned out that one of the four bolts that held the cast aluminum oil pan to the frame rail was missing and the female threads in the oil pan seemed a bit sloppy, so I drilled out and retapped all four and added these Helicoils from McMaster-Carr;
http://www.mcmaster.com/#91732a746/=ygdkbh
As the 1200 was getting the solid motor mounts, it got a deep sump cast iron oil pan that I picked up from one of our members.
Picked up 4 new grade 8 bolts, 3/8" - 16 x 1", and lock washers from my local hardware store to attach the ISO rails to the oil pan.
And a couple of new
Oil pan gasket (part # 235353-S)