I finally had a chance to get some more done on this project this week. as of right now ive had it running and driving but pulled the muffler off to modify and paint it. I dont have any pictures of it all together but I do have some more detailed picks of the motor plate and the clutch driver spacers. The spacer thats closest to the flywheel I had 3/16" cut off one side so it would pilot into the back side of the other spacer so every thing centers up. On the motor plate all I had to do was move the rear bolt holes 3/4" forward of the rear slots and then drilled to new front ones.
__________________
Cub cadets 100, 128, 582, 1050, #2 tiller, 42" blade, 2-10" Brinly plow, 12" cat0 Brinly plow.
|