421U111 deck on a 129?
I managed to pick up a nice deck today off a 104 cub today.The guy was stripping all the stuff off the tractor to make a puller.I got the deck and the mule drive for 20 bucks plus the belts.Does any one know if I can make this work on my 129. I know the mule drive wont fit but wondering if my mule drive on my 129 will.Looking at the difference couldnt see a lot other than width of the mule drives and the angle on the one pulley.My 44c deck that came with the 129 needs a lot of attention.If this would work it will give me time to rework the 44c like it needs.Any and all replys welcome....Thanks in advance Randy
|
I think the deck will work on your 129...it does not hurt to try! It will take a different PTO belt I think...but before I'd buy a belt, I stick the 42 under the 129 and do a mock fit.
|
I am not sure what the difference is , Mine is a 422U1111 and it is under the 149. If it looks something like this it ought to work.
http://i286.photobucket.com/albums/l...pulleys004.jpg http://i286.photobucket.com/albums/l...pulleys005.jpg |
Thanks guys the mock up is gona happen today.Diz it looks just like that so thats good news...I get a little confuzzed on which decks fit what sometimes...
|
Diz do you remember what pto belt you used?
|
Here is a belt chart...find your 129 then the deck and it will give you the belt size...
http://home.comcast.net/~dos0711/CCBELTCHART.htm |
I have an extra 42" IH-490489-R2-3/8 X 80" belt.
|
Thanks guys for the info I new I'ld seen that chart somewhere before big help....Thanks for the offer on the belt but it looks like I need the 3/8 by 81 inch belt for this...Good news after work today I got it all installed on the tractor with out much of hitch.Bad news no belt I have or could find local would fit.Does anyone know a good place to look for the 3/8 belts?When you need a belt you need a belt.Ive been to tractor supply,Orielys and one local lawnmower shop but nothing so far....Im going to try napa tomorrow.My local Cub dealer is absolute of no use for anything.Been there 3 times for other parts and will not be back...Long story there.
|
My NAPA was able to order a belt that was close to what I needed, but it was an automotive belt. It will work as a spare. I needed a 75 1/2 and they had a 75.
|
I don't know what size mine is but the number on the belt is 490489R2.
Its a Cub Cadet belt. I am lucky enough to have a great dealer close by. |
All times are GMT -4. The time now is 07:09 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.