Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   Cub Cadet Rear Engine Rider & ZTR (RER) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=43)
-   -   Muffler replacement (https://www.onlycubcadets.net/forum/showthread.php?t=45759)

Rickyb 09-05-2016 05:03 PM

Muffler replacement
 
Does anyone know how the two tail pieces hook into the muffler. My nephew while backing ran over a pole that caught the bracket the muffler bolts to and bent it back towards front of mower. This broke the four bolts holding the muffler on. The muffler will slide off the two tail pipe ends. Does this bracket hold all this together or is tail pipe ends welded to muffler and they broke loose? Thanks Ricky

2006 RTZ 50 with Kaw motor

Sam Mac 09-05-2016 08:08 PM

Post a few pics of your problem. Other wise check on the Cub Parts site and see how it is supposed to go together. My best answer. Sorry but I've never even seen what you have. :beerchug:

Rickyb 09-05-2016 09:44 PM

Looks like the dual tail pipes slip into the muffler. The muffler then bolts by 4 bolts to the muffler bracket. My bracket was bent and 3 of the 4 bolts had rusted out of the muffler. Bought a new muffler and bracket which I need to get her going again. The muffler bracket deflects some of the noise but cadet could have came up with a better set up.

J-Mech 09-05-2016 09:57 PM

Quote:

Originally Posted by Rickyb (Post 390855)
but cadet could have came up with a better set up.

Which is true of basically everything made after 1996 or so.


All times are GMT -4. The time now is 03:43 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.