Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   The Tool Shed (https://www.onlycubcadets.net/forum/forumdisplay.php?f=32)
-   -   No 1 & No 2 Greenerd style arbor plate (https://www.onlycubcadets.net/forum/showthread.php?t=50311)

Jeff in Pa 10-19-2017 09:07 PM

No 1 & No 2 Greenerd style arbor plate
 
1 Attachment(s)
I'm having some "daisy" plates cut on the waterjet at work for No 1 and No 2 Greenerd arbor presses.

I can add you to the group buy if you're interested. $25 shipped for the No 1 plate and $33 for the No 2 plate ( USA shipping )

Offer will be good for two weeks at most.
Jeff

No 1 plate shown

OldSkull 10-22-2017 10:35 AM

To bad! Mine is a bit bigger....:biggrin2:

Greenerd 3 3/4.
https://scontent-yyz1-1.xx.fbcdn.net...1b&oe=5A6ACFE9

Jeff in Pa 10-22-2017 08:41 PM

Quote:

Originally Posted by OldSkull (Post 435762)
To bad! Mine is a bit bigger....:biggrin2:

Greenerd 3 3/4.

Very nice :beerchug:

Could you get me the distance from the plate pivot ( center ) hole to the centerline of the ram?

No. 3 plates will be offered later.

OldSkull 10-22-2017 09:15 PM

Quote:

Originally Posted by Jeff in Pa (Post 435820)
Very nice :beerchug:

Could you get me the distance from the plate pivot ( center ) hole to the centerline of the ram?

No. 3 plates will be offered later.

I will draw a sketch and made measurements ASAP but this is bigger then a number 3, the model 3 3/4 is the biggest model on a stand the model 4 is a floor model :beerchug:

Jeff in Pa 10-23-2017 08:17 PM

Quote:

Originally Posted by OldSkull (Post 435828)
I will draw a sketch and made measurements ASAP but this is bigger then a number 3, the model 3 3/4 is the biggest model on a stand the model 4 is a floor model :beerchug:

Yes it is, it's a 5 ton model you have there. That rachet makes it very easy to use. The handle is always at the "right spot".

Thanks

Jeff in Pa 12-02-2017 01:05 PM

1 Attachment(s)
Quite a few folks took advantage of the offer. I will post again on the next run as it will be larger plates offered too.

DoubleO7 12-02-2017 05:25 PM

I bet the mail clerks will all go on break next time they see you unloading in the parking lot.

Jeff in Pa 12-02-2017 07:32 PM

Quote:

Originally Posted by DoubleO7 (Post 439679)
I bet the mail clerks will all go on break next time they see you unloading in the parking lot.

Clerks? bahahahaha I mail them from Palm, PA. There is exactly one person there. Palm is a very small town.

None of the boxes weighed more than 5 pounds. I carried all 12 boxes into the post office using one of those cloth carry bags.

OldSkull 12-04-2017 05:56 PM

2 Attachment(s)
Jeff I just found were I store the drawing for old Greenerd press from model 1 to model 4, here the one for my 3 3/4. Let me know if you need more info. :beerchug:


All times are GMT -4. The time now is 06:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.